Volvo Ocean Race…..
Leg 7 Is underway……
[youtube http://www.youtube.com/watch?v=svlOUYj-daE&w=560&h=315]
Leg 7 Is underway……
[youtube http://www.youtube.com/watch?v=svlOUYj-daE&w=560&h=315]
Apparently this was the first time in quite a while that the Volvo Ocean Race crews have had to spend their Dec.24 and 25 on the water. Leg 2 came to a close on Monday with with first place overall, Team Telefonica taking the victory at an almost photo finish over second place overall, Team Camper….
Newport Rhode Island is no stranger to the Americas Cup. Annapolis local, Terry Hutchinson and Team Artemis seem to be the big match racing threat. While James Spithill and Team Oracle maintain a 4 point lead in the overall standings just ahead of Emirates Team New Zealand. The standings atop the leaderboard are tight to…
Before stepping the mast there needs to be several preparations in order for everything to go smoothly once the crane arrives. So take your time and double, triple check everything in order to keep from having to go aloft, or worse, having to re-step the mast once the mast has been stepped. Below you’ll see a few…
We just finished our first trip to Grand Cayman on Wednesday for a full re-rig of a 45′ catamaran. Currently, we are in Tortola at Nanny Cay spec’ing and measuring for some new masts. Despite all of the beauty, there is still lots of wreckage everywhere, mostly complete write offs. It seems rebuilding has been…
The Americas Cup gets rolling in less than 80 hours. Make sure you catch the live coverage of day one right here (courtesy of americascup.com and youtube.com) The teams have had some good time off since Newport. I don’t know about you, but I am getting anxious for the excitement to resume in San Francisco. This should be a great venue….
…Which do you prefer? When talking about wire standing rigging for sailboats, there are two primary ways to secure a fitting to the end of the cable, the swage fitting and the mechanical fitting. One requires a specialized, expensive machine (pictured below) that is used to essentially squeeze or hammer the fitting onto the wire,…
No products in the cart.
|
Uploaded
Failed
|
![]() |