Showing 73–84 of 88 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/8″ Width: 4-3/8″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius: 8′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-11/32″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-5/8″ Height: 2-5/8″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 4″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 4-3/8″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-11/32″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Stand-up toggles hold blocks upright on travelers. This toggle will fit blocks and cars with either 5/16″ or 3/8″ (8mm or 10mm) pins. Height: 2-15/32″ Max working load: 7500lb Accepted blocks: Element 60mm doubles/triples, Element 80mm singles, Small Boat 3″ single/fiddle/midrange blocks, 57mm Black Magic doubles/triples, 75mm Black Magic singles/doubles, 100mm Black Magic single.
Stand-up toggles hold blocks upright on travelers. Control tangs allow for the attachment of control blocks. This toggle will fit blocks and cars with either 5/16″ or 3/8″ (8mm or 10mm) pins. Height: 2-3/4″ Max working load: 7500lb Control block pin: 1/4″-6mm Accepted mainsheet blocks: Element 60mm doubles/triples, Element 80mm singles, Small Boat 3″ single/fiddle/midrange…
Harken 75 mm Cheek Ratchet Block
1 × $104.95
Harken Traveler Car - 22mm Hi-Load w/Fixed Sheaves & Eyestrap
1 × $284.95
Harken 75 mm Carbo Ratchamatic Block - Swivel, Becket, Cam Cleat
1 × $326.95
Harken 75 mm Double Carbo Block - Swivel, Becket
1 × $207.95
Harken Traveler Car - 22mm w/Athwartships Loop for Soft Attachments
1 × $210.95
Harken End Control - 32mm Hi-Load
1 × $711.95
Harken Halyard Tensioner T-Track - 32mm
1 × $392.90
Harken Genoa Lead Car - 32mm Non-Captive-Bearing for 4:1 Car Control
1 × $1,801.95
Harken Traveler Car - 22mm Low Load Non-Captive-Bearing w/Pivoting Shackle
1 × $178.95
Harken Genoa Lead Car - 27mm ESP for Pinstop Tracks
1 × $285.95
Harken Genoa Lead Car - 22mm for 4:1 Car Control
1 × $495.95
Harken Pinstop End Control - 22mm
1 × $131.95
Harken 57 mm Carbo Ratchet Block - Swivel
1 × $84.95
Harken Line-Shedding Endstops - 27mm Low-Beam
1 × $19.95
Harken Genoa Lead Car - 32mm for 4:1 Car Control
1 × $1,749.95
Harken 57 mm Ratchamatic Block - Swivel, Becket
1 × $125.95Harken Traveler Car - 32mm w/Pivoting Shackle & 4:1 Controls
1 × $411.95Subtotal: $7,528.10