Showing 73–84 of 88 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/8″ Width: 4-3/8″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius: 8′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-11/32″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-5/8″ Height: 2-5/8″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 4″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 4-3/8″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Length: 5-3/8″ Width: 3-11/32″ Height: 3-1/2″ Max working load: 3000lbs Breaking load: 7000lbs Minimum curved track radius:…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 9-9/16″ Width: 5″ Max line dia: 10mm – 3/8″…
Stand-up toggles hold blocks upright on travelers. This toggle will fit blocks and cars with either 5/16″ or 3/8″ (8mm or 10mm) pins. Height: 2-15/32″ Max working load: 7500lb Accepted blocks: Element 60mm doubles/triples, Element 80mm singles, Small Boat 3″ single/fiddle/midrange blocks, 57mm Black Magic doubles/triples, 75mm Black Magic singles/doubles, 100mm Black Magic single.
Stand-up toggles hold blocks upright on travelers. Control tangs allow for the attachment of control blocks. This toggle will fit blocks and cars with either 5/16″ or 3/8″ (8mm or 10mm) pins. Height: 2-3/4″ Max working load: 7500lb Control block pin: 1/4″-6mm Accepted mainsheet blocks: Element 60mm doubles/triples, Element 80mm singles, Small Boat 3″ single/fiddle/midrange…
XCS Clutch,6-10mm Line, Black - Side Mount Port
1 × $333.95 
XCS Clutch,6-10mm Line,White - Side Mount Starboard
1 × $333.95 
Harken Traveler Car - 32mm Hi-Load w/Stand-up Toggle & Control Tangs
1 × $580.95
Harken Traveler Car - 32mm Hi-Load Double Cars w/Stand-up Toggles & Control Tangs
1 × $901.95
Harken Trim Caps - 27mm Low-Beam
1 × $17.95
Harken Traveler Car - 32mm Hi-Load w/Pivoting Shackle & 4:1 Controls
1 × $617.95
Harken Pinstop End Control - 32mm Threaded
1 × $397.95Harken Traveler Car - 32mm w/Stand-up Toggle & Control Tangs
1 × $435.95Subtotal: $3,620.60