Showing 25–36 of 89 results
Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track. The Harken ESP range is a good budget option for cruisers and club racers where budget is as much of a concern as…
CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…
CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…
Adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2004. Car has two…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 5/16″ hex-head bolts. Harken Low-Beam tracks are designed to be…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Harken 29 mm Triple Bullet Block - Cam Cleat
1 × $130.61
Harken40mm Composite Organizer – 5 Sheave
1 × $110.16
Harken40mm Stainless Steel ESP — 3 Sheave
1 × $257.32Harken Genoa Lead Car - 32mm for 3:1 Car Control
1 × $1,780.95
Harken End Control - 32mm ESP w/Double Sheave & Cam Cleat
1 × $572.53
Harken40mm Composite Organizer – 4 Sheave
1 × $91.95
Harken 57mm 3 Sheave Big Boat Organizer
1 × $778.70
Harken57mm Aluminum ESP Organizer — 3 Sheave
1 × $183.55Harken High-Beam Endstops - 32mm Heavy-Duty
1 × $78.95
Harken 57mm 2 sheave organizer part 6052
1 × $145.99Harken Low-Beam Endstops - 22mm Heavy-Duty
1 × $39.95
Harken Genoa Lead Car - 27mm ESP Hi-Load for 4:1 Car Control
1 × $803.95
Harken Line-Shedding Endstops - 27mm Low-Beam
1 × $20.96
Harken In-Mast Furling Outhaul Car - 27mm
1 × $507.95
Harken Traveler Car - 22mm Low Load Non-Captive-Bearing w/Pivoting Shackle
1 × $187.97
Harken End Control - 32mm Hi-Load
1 × $747.98Harken In-Mast Furling Outhaul Car - 32mm Hi-Load
1 × $1,694.95
Harken Traveler Car - 22mm Hi-Load w/Fixed Sheaves & Eyestrap
1 × $299.95
Harken Genoa Lead Car - 32mm ESP for 4:1 Car Control
1 × $1,196.61
Harken End Control - 32mm w/Double Sheave
1 × $549.95
Harken End Control - 32mm w/Triple Sheaves
1 × $695.95
Harken Track Splice link - 22mm
1 × $13.95
Harken Genoa Lead Car - 27mm for 3:1 Car Control
1 × $767.95
Harken Genoa Lead Car - 27mm ESP Hi-Load for 3:1 Car Control
1 × $772.16
Harken Traveler Car - 22mm Hi-Load w/Pivoting Sheaves & Swivel Cam
1 × $479.00Harken Halyard Tensioner Slider Car - 32mm Single Pin
1 × $2,003.50Subtotal: $14,913.44
|
Uploaded
Failed
|
 |