Showing 25–36 of 88 results
CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…
CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…
Adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2004. Car has two…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 5/16″ hex-head bolts. Harken Low-Beam tracks are designed to be…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 3/8″ Flat-head screws. Additional lengths can be spliced together using the Harken 32mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Harken 75 mm Cheek Ratchet Block
1 × $104.95
Harken Traveler Car - 22mm Hi-Load w/Fixed Sheaves & Eyestrap
1 × $284.95
Harken 75 mm Carbo Ratchamatic Block - Swivel, Becket, Cam Cleat
1 × $326.95
Harken 75 mm Double Carbo Block - Swivel, Becket
1 × $207.95
Harken Traveler Car - 22mm w/Athwartships Loop for Soft Attachments
1 × $210.95
Harken End Control - 32mm Hi-Load
1 × $711.95Harken Halyard Tensioner T-Track - 32mm
1 × $392.90Harken Genoa Lead Car - 32mm Non-Captive-Bearing for 4:1 Car Control
1 × $1,801.95
Harken Traveler Car - 22mm Low Load Non-Captive-Bearing w/Pivoting Shackle
1 × $178.95
Harken Genoa Lead Car - 27mm ESP for Pinstop Tracks
1 × $285.95
Harken Genoa Lead Car - 22mm for 4:1 Car Control
1 × $495.95
Harken Pinstop End Control - 22mm
1 × $131.95
Harken 57 mm Carbo Ratchet Block - Swivel
1 × $84.95
Harken Line-Shedding Endstops - 27mm Low-Beam
1 × $19.95Harken Genoa Lead Car - 32mm for 4:1 Car Control
1 × $1,749.95
Harken 57 mm Ratchamatic Block - Swivel, Becket
1 × $125.95
Harken 75 mm Triple Carbo Block - Swivel
1 × $275.95
Harken 75 mm Carbo Fiddle Ratchet Block - Swivel, Becket, Cam Cleat
1 × $267.95
Harken 75 mm Quad Carbo Block - Swivel
1 × $304.95
Harken 75 mm Triple Carbo Block - Swivel, Becket
1 × $290.95
Harken Genoa Lead Car - 27mm ESP for 4:1 Car Control
1 × $478.95
Harken 75 mm Carbo Fiddle Ratchet Block - Swivel, Cam Cleat
1 × $252.95
Harken 57 mm Triple Block - Swivel, Becket, Cam Cleat
1 × $257.95
Harken 57 mm Triple Carbo Block - Swivel
1 × $167.95Harken High-Beam Endstops - 32mm Heavy-Duty
1 × $74.95Subtotal: $9,488.70