The Integral Backstay Adjuster

Hydraulic Backstay Adjuster

Integral backstay adjusters can play a big role in how a boat sails. Being able to adjust the backstay tension from the pump of a handle can be useful on cruisers just as much as racers. We all need to make general changes to the boats trim depending on wind and wave conditions in order to keep control of the boat.

Please note: in the case of the offshore cruiser or racer, one should ask their local rigger about having a fail-safe turnbuckle assembly rigged. When set up properly a ‘Hydraulic Backstay Failsafe’ allows the sailor to mechanically tension the backstay in the event of hydraulic failure/ leak.

SELDEN

Selden hydraulic tensioner. Selden backstay adjuster. Selden integral adjuster
SELDEN {click image to link manufacturer website}

Seldén integral hydraulic backstay adjusters offer a visible upper gauge and an automatic two-speed pump. Compare the exact model’s stroke, load rating, pin sizes, installed length and operating instructions with your rig’s requirements.

Compare current specifications and pricing on the product page. Installation, fittings and service requirements can change the total cost; ask for a current quote for the complete installation.

NAVTEC

Navtec integral backstay adjuster
NAVTEC {click image to link manufacturer website}

Navtec integral adjusters remain a familiar option on many sailboats. Hydraulic product and service information is available from Navtec Hydraulics. For rod rigging, consult Hayn’s rod-rigging documentation; hydraulic and rod-rigging parts should be identified separately.

HARKEN

Harken Integral Adjuster
HARKEN {click image to link manufacturer website}

Harken integral hydraulic adjusters use a double-acting pump, moving oil on both handle strokes. Check the selected unit’s dimensions, gauge arrangement and rated load rather than assuming interchangeability. For J/105 racing, class rule interpretation 17-03 permits any brand with a single- or double-acting pump, with or without a gauge; the stated maximum backstay tension is 3,000 lb. Check the current class rules before changing equipment.

SAILTEC

NEW model Sailtec adjuster
SAILTEC {click image to link manufacturer website}

Lastly, we have Sailtec‘s line of integral adjusters. Sailtec is also a reputable company on a  smaller scale. This company (like Navtec) has also been around for many, many years, proving their quality and dependability. What I like about Sailtec is that they have left their design relatively unchanged over the years which makes service parts readily available!


Service intervals: Follow the exact manufacturer’s maintenance schedule and have leaks, loss of holding pressure, corrosion or damaged fittings assessed promptly. Frequency and rebuild cost depend on the model, age, condition and operating environment. Contact our hydraulic systems service team for identification and a current service assessment.

All in all, all of these products truly do an outstanding job at what they are supposed to do, tension a stay hydraulically. Not to mention these are all reputable companies that will stand behind their product 100% (within reason). That being said the decision will come down to personal preference, look, functionality, and service life. As well as of course, purchase price.

Click the links to the various manufacturers, take a look for yourself. If you need help deciding you can always give us a shout, we’d love to hear from you.

As always thanks for the read and if you have a question for us or would like us to take a look at your rigging hydraulics, leave us a comment down below……….

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

8 Comments

  1. I have a harken backstay adjuster
    When tensioned bothers the port and starboard rigging are hand tight
    When the valve is fully released the tension on the pump side is hand lose but the other side is still very tensioned
    Is this normal?
    I have a Blue Jacket 40

  2. I’m in need of a new adjuster for my J/42. The original SAILTEC one leaks despite two rebuilds by SAILTEC. Does it make sense economically to buy a new unit from you? I do not need help with the install.

    Thanks,

    Barry

  3. Thank you for all this information! I’m looking for a replacement to the ridiculous back stay adjuster in our First 35s5. The French have some great qualities but engineering is clearly not among them. :-)

    1. Lol. Hi and thanks for the read. We can provide backstay adjuster from any manufacturer. We will also help you install it properly.

      Depending on what you have now we may even be able to help you get your existing on working better.

      Feel free to email us or inquire further when it suits you.

      T.R.C.

  4. Helpful information. Fortunate me I found your web site unintentionally,
    and I am surprised why this twist of fate did not came about in advance!
    I bookmarked it.