| | | | | | | |

Cruisers Can Fly Spinnakers Too!

So are you sick of your jib flogging around when you turn the boat down wind? Do you dread heading down wind because you know the boat’s performance will drastically suffer? Somehow the thought of the spinnaker is always nice, but when it really comes down to it, MAN that’s a lot of work! Not…

| | | | | | |

Tides Track and Lazy Jacks!

Can’t afford a Boom Furler? Looking for an easier way to hoist, douse, and stow your main or mizzen sails? Well there are two products that you may want to look at. They are called a Tides Marine Strong Track and our very own T.R.C. Lazy Jacks (pictured left). I do realize that many people cringe…

| | | | |

Which Sealant Should I Choose?

This is an often asked question which seems to have many different answers. Over time we have tried various sealants and have narrowed it down two primary products as our choice of sealant, 3M’s UV4000 and Boat Life Life Calk. Boat Life’s Life Calk provides a long lasting seal that stays flexible through out its lifespan….

| | | | | | |

Rod Rigging

    In the world of sailboat standing rigging there are three common materials used, stainless steel wire, Nitronic 50 rod, and various types of synthetic fibers, which are becoming more and more popular. I want to talk today about Nitronic 50 stainless steel rod. This specific type of stainless steel is very strong and noble. Rod…

| | | | | | |

Servicing The Chain Plates

The chainplate is typically a metal plate used to fasten a stay to the boat. One end of the chainplate has a hole for the pin of the turnbuckle, the remainder of the chainplate is used to attach the plate to the boat  via a bulkhead, knee, tie rod or the hull itself. Chainplates get their name…

| | | | | | |

Synthetic VS. Vinyl Coated VS. Un-coated Stainless Steel Lifelines

Many people these days are looking towards synthetics or to un-coated stainless steel to replace their lifelines over the traditional vinyl coated lifelines of the past. First, let’s talk a little bit about the cons of using vinyl coated wire: the wire cannot be visually inspected for failure, the wire is typically made from a…

| | | | |

How to Adjust a Turnbuckle

The concept of how to properly adjust a turnbuckle seems to sometimes elude most people. This is understandable as I didn’t used to spend my days thinking about tightening cables, like I do now. So let’s take a moment to discuss how this is done properly. There are generally three different styles of turnbuckles. Yes, there are a…

| | | | |

Boat Rope

The vast U.S. cordage market allows us to have several competitive options including; Robline, New England, Samson, Yale, and Marlow Ropes, just to name a few. Each one of these manufacturers provide various rope constructions utilizing different materials to allow the consumer to achieve different functions based on application. All of the jargon like Spectra, Dyneema, Vectran, Kevlar, Technora, Dacron, Double Braid, Single Braid,…

| | | | | |

How to Service Your Winches

Some winches are more difficult to service than others. If you do not know what to expect, certain parts, depending on manufacturer, can come sliding out at inopportune times and jump overboard! I happen to know this from personal experience and if you are really unlucky (like I was) then it may be a part from a vintage…

| | | |

Not all T Terminals are Created Equal……

‘T’ Terminals, ‘T’ Balls, Gibb Hooks, Shroud Terminals, and Lollipop Fittings are just some of the nicknames for these special fittings. I would just like to take a minute to address the different terms associated with these fittings; their uses and misuses. It appears that many boats in today’s sailboat market use these types of…