Remove a filter or try another size combination.
Showing 37–48 of 51 results
Colligo Torque Rope – For Asymmetric Furlers & Luff Line Sails Colligo’s torque ropes are custom luff lines for Code Zero sails and torque lines for top-down furling spinnakers. Each line features a Colligo Dux core with a proprietary cover, delivering the best combination of low stretch and torque transmission on the market. These ropes…
Whisker poles, while quite useful, can be a challenge to work with and store when not in use. Our on-the-mast pole systems allow the pole to be worked with easily from the mast, and allow for the pole to be stored vertically on the mast when not in use. The outboard (jaw) end of the…
Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…
Forespar whisker poles are heavy-duty and built to last. Telescoping line-control poles can be extended into position with an internal purchase system, and retracted for easier storage. The system is simple, and makes the extension and retraction of poles quick and easy. And – the entire operation can be executed while being positioned at the…
Forespar whisker poles are heavy-duty and built to last. Telescoping line-control poles can be extended into position with an internal purchase system, and retracted for easier storage. The system is simple, and makes the extension and retraction of poles quick and easy. And – the entire operation can be executed while being positioned at the…
Forespar whisker poles are heavy-duty and built to last. Telescoping line-control poles can be extended into position with an internal purchase system, and retracted for easier storage. The system is simple, and makes the extension and retraction of poles quick and easy. And – the entire operation can be executed while being positioned at the…
Harken® recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. Use the 7405 as an inboard lead for two lines, useful for continuous line furlers or cutter rigged boats with two furlers. Sheave dia: 1-9/16″ – 40mm Max line: 3/8″ – 10mm Max working load: 485lb – 220kg For use…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Furling leads are offered separately or in complete kits. A Carbo T2 block with shockcord attaches aft of the double cam to keep line…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Two stanchion leads forward guide line outboard to keep sidedecks clear. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
Originally built for Volvo 60s, Code Zero furlers are used with free-flying asymmetrical headsails and staysails. Suitable for boats up to 21 m (70 ft), they tame Code Zero sails, screechers, Gennakers®, and staysails. The Harken Reflex furling system is a game changer! The previous generation of free-flying sail furlers often resulted in partial or…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Furling leads are offered separately or in complete kits. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling line. Max line: 3/8″ – 10mm For use with 1″/25mm stanchions
Cyclops Marine Smarttune 1/2"
1 × $1,794.10 
Cyclops Marine Smarttune 3/4"
1 × $2,821.50 Harken 40mm Double Stanchion-Mount Block
1 × $90.95Subtotal: $4,706.55
|
Uploaded
Failed
|
 |
