Fountain Pajot 38 Rigging (completed) San Juan Del Sur Nicaragua
Sabre 402 (Completed) St Thomas:
39′ Fast Passage Chasing Bubbles Sailing Vessel (Underway)
Click on the images for a larger view.
Little Harbor 54
Little Harbor 54
Little Harbor 54 Centerboard CableNew Centerboard Lifting TangNew Centerboard Cable InstalledCenter Board Reel Winch ServiceRod and Paint Service CompleteStepping the MastReady for the MastRig Up Still Lots to Do….Little Harbor 54
The Hinckley Pilot Job
The Hinckley Pilot Job
Designing a New Modern 4 Sheave Masthead
…
Before Welding
After
Ready to Install
New Boom Bracket and Toggle
Closing Up the Giant Hole Left Behinf from Old External Single Sheave
New Masthead has Been Cut-in and is Ready
Before Paint
Painted!
The New Masthead Design Works Perfectly
TRC Spars!
…
…
The Hinckley Pilot 35 Refit
The Pearson Flyer Boom Project
The Pearson Flyer Boom Project
New Aluminum Reinforcement with Lightning Holes…Installed and Ready to Weld. The Boom Would Sag to Leeward due to the Mid-boom Sheet Location.an Internally Mounted Forespar Vang Lug. That’s Not Going Anywhere!New TRC Outhaul System 8:1 Easy to Cleat and Easy to Release
The Rigging Company in Norfolk
the rigging company in Norfolk
The Rigging Company Hydraulics in Norfolk
Shop Upgrades in 2020
Shop UpgrADES in 2020
Morgan OI 41 Sloop
Morgan OI 41 Sloop
Internalizing HalyardsDesigning the New Spreader Base and Lower Shroud Tang DesignThe New Doubler Plate Ready For Welding…After Welding with a New Tang Bolt HoleGetting Ready To Install the New Spreader Brackets..After Welding. Ready for the New SpreadersNew Spreaders Ready for WeldingNo More Sliding Gooseneck….Desiging and Building a New Stainless Steel Anchor Roller…Wait Until You See this Thing…The New and the Old. Anchor Roller and Stem Fitting Blam!..so Shiny!Brand New ChainplatesAfter Trimming the Mast Butt we had to Modify the Mast StepA New Twist on the Old Boom…A Morgan Outisland 41 Sloop Like No OtherSpreaders are ReadyCan’t Wait to See This One When She’s All Finished. To be continued….
Bristol 29.9
Bristol 29.9 New Mast Electrical, New Longer Spreaders, New Standing Rigging, New Furler, Serviced Inspected and Relocated Chainplates, Some Deck Repair, and Freshly Remounted Deck Hardware….Don’t forget to add a deck tie down if you’re running mast lines aft and your boat is keel stepped!!!
The Hinckley Bermuda 40 Project!
The Hinckley Bermuda 40 Project!
Looks Like We’re Getting Ready to Build Some Masts
New Mast Steps Back from Welding
LOOK at that Weld!
How We Build Things at TRC
Main and Mizzen Mastheads Ready for Welding
Mizzen Mast ready for Welding
HINCKLEY B 40 CUSTOM BUILT by TRC
Main Mast Ready for Welding
Custom Doublers Ready for Welders
Mizzen Mast back From Welding
Mizzen Mast
Boom Ends Ready for Welding
Spreaders and Boom Ends
Every Load Bearing Hole Receives Stainless Steel Bushings
Main Boom Gooseneck Bracket w/ Custom Gussets.
Main Boom Ready for Paint
Getting Ready for Primer and Paint
Main Mast Ready for Paint
…
Spreaders Back from Paint
Main Mast Back from Paint
…
…
Mizzen Mast Back from Paint
Main Mast Ready for her Crate
…
Main Boom Ready for Shipping
Mizzen Mast Final Assembly
A Clever Dolly Solution so we can Move the Masts when they Arrive – Courtesy of Aaron Moeller Designs
Crating Things Up
Unloading the Crate
All the Fixins
Yep…There’s a Mast in There
Looks Like it Survived the Trip
Our Traditional Discontinuous Spreader Tip Solution
TRC Spars!
The New Mizzen Mast
Mizzen Mast is Dressed and Ready to be Lifted
Main Mast is Dressed and Ready to be Lifted
Deck Ring – Before
Deck Ring – After!
Old Chainplate Backing Plates
New Thicker Chainplate Backing Plates
Old Backstay Assembly
New Backstay Chainplate Assembly
New Chainplates are Looking Good!
The Team that Made it all Happen
The New Mast Step is in and it FITS!
Getting Masts Vertical for the First Time
New TRC Pole Control System
New Masts are In. ‘Lots to do….
Main Boom Clearing the Mizzen Forward Intermdiate Shroud…This had me Nervous
Getting Closer
Freshly Lashed Bamboo Rollers
Approaching the End
Old Stanchion
New Stanchion
That New Harken MKIV
JOB COMPLETE!
…
The Newly Refit Hinckley B40 MkI Yawl by The Rigging Company.
The final product under sail
The final product under sail
C&C LAndFALL 39 New mast and leisure furl
C&C LAndFALL 39 New mast and leisure furl
Configuring Main Halyard and Furling Line Leads in Tight Spaces. Leisure Furl. C&C Landfall 39. Harken Unipower.Making Custom Double Aluminum Custom Aluminum Bullseye Ready for AnodizingLewmar Domino Double Clutch with Custom Angled Riser and Custom Double Bullseye to Reduce Fleet Angle Before the Clutch
Catana 47 Full Refit, Carbon Mast Paint, New Rod Rigging, Pro Furl Headsail Furler Bearing Service, New Dyneema Sprit Stays
Catana 47 Full Refit, Carbon Mast Paint, New Rod Rigging, Pro Furl Headsail Furler Bearing Service, New Dyneema Sprit Stays
Catana 47 Full Refit, Carbon Mast Paint, New Rod Rigging, Pro Furl Headsail Furler Bearing Service, New Dyneema Sprit Stays
Morgan 382 Refit
Morgan 382 Refit
The Rigging Company and The Blue Angels
The Rigging Company and The Blue Angels
2019 J/24 and J/22 East Coast Championship
2019 J/24 and J/22 East Coast Championship
TRC Removable Inner Forestay System, Beneteau 50
TRC Removable Inner Forestay System, Beneteau 50
C&C Landfall 39 Custom Selden Mast Vang Bracket in the making
Forespar Yacht Rod Toggle and Custom Selden Bracket by TRC
Magnified Rod Head. Vertical cracking may occur when re-heading older rods
Magnified Rod Head. Vertical cracking may occur when re-heading older rods
Another custom Forespar Yacht Rod toggle, this time out of stainless steel 316. We had to make this to fit the old Isomat mast bracket. Made in house with a cut off wheel, grinder, drill, some sand paper, and some buffing compound. Pearson 37.
5/8" Swaging….Available at The Rigging Company!
5/8″ Swaging….Available at The Rigging Company!
TWO Lagoon 450’s getting brand Forespar Leisure Furl Upgrades!
TWO Lagoon 450’s getting brand Forespar Leisure Furl Upgrades!
These installations are a bit more tricky than the standard LF install due to the extreme mast rake, but it turned out perfect! Thanks to the team at TRC.
THE X4 PROJECT
THE X4 PROJECT
A Brand New X-Yachts X4 with some custom TRC upgrades, including but not limited to: Dyneema and friction ring In-haulers and Barber-haulers, custom TRC Facnor Code Zero Furler, a custom synthetic Bob-stay for the factory Carbon Prod, re-located the traveler cam cleats, Moved new Spinnkaer halyards from the fractional position on mast to masthead.
The TRC Riggers Pouch. Every staff member makes one on day 1.
The Rigging Company 2018…A Look Back
The Rigging Company 2018…A Look Back
Bert Jabin’s and The Rigging Company. Being happy with your job is important.Masts need walks too. T’was just a beautiful day at the boat yard.TRC after work Team Practice, J-24’sTwo of TRC’s crew sailed Down The Bay aboard the beautiful Columbia!J24 East Coast ChampionshipsOwner Jimmie Cockerill out for some 505 Dinghy Practice
Beneteau 49
The C&C 35 Project
New Electrical. On The Mast Spinnaker Pole System. New Harken Integral Backstay Adjuster with fail-safe turnbuckle assembly. New Radar with Kato Marine Guard…. a must if you need to have the radar on the mast!
Beneteau 49
Ericson 32 Custom Chainplate Backing Plates and Tie Down Rods
Lazy Jacks For Sail Packs!
New Sail Pack Lazy Jacks, The Rigging Company Way!New Sail Pack Lazy Jacks, The Rigging Company Way!
Bent Selden Masts Boom. If a rigid vang is present, especially a hydraulic one, be mindful of your vang tension vs. your sheet tension or you could bend your new boom. Discovery Yachts 56
Even new boats can have their issues. New mast boot to replace the factory one that leaked. It’s all in how you install it! Discovery 56
Recently purchased from charter in the Caribbean, we’ve given this Jeaunneau 53 a complete facelift……New Standing Rigging. New Running Rigging……New Electrical…..New AwlGrip Finishes……We appreciate a Bold New Color, not just Black or White…Ready for Spring 2019 launch! Jeanneau 53
Phenomenal collaboration of Annapolis’ best, Diverified Marine Services and The Rigging Company. Norseman 400 Leisure Furl Boom Service and Re-finish. Norseman 400Forespar, Awl Grip, and The Rigging Company, breathing new life into this early edition Leisure Furl SystemBack From Paint….……Ready for assembly. Norseman 400
Building a Better Retractable Bowsprit
J100 Sprit-in… with retractable Bow Sprit and Bob StayThe interior workings of a Retractable Bow Sprit with Bob Stay. J100
TRC Goes to the Virgin Islands again!
The Rigging Company heading to the USVI for a Custom Spar Build. Hinckley B40 MKII YawlA little fun before our flight back homeThe Rigging Company heading back home to get started on these new masts from St. Thomas. Hinckley B40 MKII Yawl
After finding the matching pair of stanchion bases to match the rest of the boat. We added an additional set of stanchions near mid-ships, which always looked like one was missing. We also converted it from a single course to a double course. We completed the set with a solid rail for the aft lower lifeline. Looks very factory! Luders 33
The Tartan 3800 Project
A Properly Tuned Tartan 3800. Hydraulic Backstay Failsafe. Sabre 38. Tartan 3800Selden Wire Block to facilitate the new Adjustable backstay system. Tartan 3800Tartan 3800New Cascading 8:1 outhaul system. We also converted to True Single line Reefing. Tartan 3800Link Plate for furler, done the right way. Tartan 3800Tartan 3800 with new standing rigging. The Rigging Comapny/ Harken Hydraulics backstay system. Tartan 3800
Tartan Yachts 3800 all finished up.
J-40 New Mast
Another New Mast System. Sparcraft Spars with Custom BSI Cap Tang System. New England Ropes Running Rigging. Chesapeake Sailmakers Stack Pack. Rebuilt and Repaired Navtec Hydraulics. All Done Up TRC Quality Work Standards. J-40…
The Moody 54 Project
[wpvideo ycnKVmBl]
It looks like a New Mast…BETTER. Moody 54.
IN MEMORY OF….
Our SUPER SECRET project revealed. Enjoy….The MEMORIAL GAFF. Stop by The Rigging Company and have a look!
Full Standing Rigging Replacement, New Headsail Furler. Custom Spreader Ends. Leopard Catamaran Sea Trial in Grand Cayman Sound. All Systems are Operational. CLICK THE TITLE FOR MORE INFO.
The Taller Mast Project.
Selden Masts, Miller Performance Engineering, and The Rigging Company, Working Together for a Brand New, Taller, Fractional Mast. Dufour Gibb Sea 43The Rigging Company On-The-Mast Whisker Pole System. Dufour 43 Tall MastLook at the SIZE of it. The Way the Boat Should Have Come from the Factory.Selden, Forespar and The Rigging Company…it’s All Coming Together. Dufour 43A New Harken Headsail Furler. Nothing but the best when it comes to line drive furlers. Dufour Gibb Sea 43Taller Mast Re-design Complete. Dufour Gibb Sea 43
Catalina 36
Cataline 36 with a Retro-fit mast tang and sheave box for a brand new removable inner forestay. Catalina 36. Inner forestay under deck fitting for Wichard Double Pad eye. Done by the Creative Staff at The Rigging Company.
The Rigging Company in the BVI
[wpvideo Qg6ISNie]
We’re in deep thought. The Rigging Company, Checking out the Carnage in Virgin Gorda
TortolaFrenchmans Cay Check out the jack-stands in the hull!Masts broken everywhere!…More carnageWhitby 55Freedom Yachts amongst the wreckage
Man that’s a pretty big travel lift!
Getting Through Some of These Hydraulics Projects.
The Rigging Company Shop from the Inside Looking Out
J40 New Sparcraft Mast and Custom Mast Step. The Rigging Company
Custom Machined Toe Rail End Caps. Ready for Anodizing. C&C 110
Bending and Making Custom ‘A’ Bolt Chainplates for the Golden Globe Race.
Shannon 37 Re-rig
The Vespers Project
Valiant 42 Ready for AwlGrip and EpoxyValiant 42 New Intermediate Shroud and Runner Configuration.Look at that Finish from Up HereHow We Wire Spreader Lights. Valiant 42. OGM KIS Spreader LightValiant 42 Ready for Sea TrialAnother TRC Triple Reef line Fairlead. We have template for this, so if you have this mast we can make you one for your to install!!Valiant 42 Refit Complete. Great Job Team!
Dehler 39. Inner Forestay/ Solent Stay System… The Rigging Company Way
[wpvideo mndn3ALm]
The Ambrosia Project
[wpvideo LFbjwk8G]
The Leopard Cat Bow Sprit, and Top Down Furler Project
Forespar Bow Sprit with Custom TRC Tack Line System. SK90 Down Stays from Samson Ropes.Facnor Code 0 Furler with Swiveling Tack Adapter matched with a Hampdjien Torsion Cable Making for one of the Best Top Down Furling Experiences. Zoom in and Notice the Selden Friction Shackle to Act as a Snatch Block for the 2:1 Tack Line.A Complete, Custom, Bow Sprit and Top Down Furling System for Catamarans. Brought to You The Rigging Company.
The Nordic 44 Re-Fit
Nordic 44 Re-fit. Doubler Plates are on and we’re ready for Paint! Nordic 44Nordic 44 Completely Restored and Ready to be Stepped.Nordic 44 Completely Restored by The Rigging Company in Annapolis.The Rigging Company On the mast whisker pole System. Nordic 44Nordic 44 with TRC 4-Leg Lazy Jacks, TRC Boom Preventer System, New Tides Track, New BSI Rod Rigging. New BSI Tangs. Complete Running Rigging Package. New Vang Lug. New Single Line Reef System. New Harken Reflex Top Down Spinnaker Furling System….with much more. Nordic 44 Ready to Furl.Nordic 44 with the New Selden GBS Sprit with Anchor Roller Mount.
The Alden Project
The Apogee Project
Going To Work. Apogee 58.Apogee 58 with 2 Brand New Harken Headsail Furlers!!! ….and Custom Link Plate!Apogee 58 from AloftApogee 58. Completely Refurbished Harken/ Marlow Mainsheet and Traveler System by The Rigging Company in Annapolis.
The Oyster 49 Project
BEFORE. Oyster 49. Goose Neck.AFTER. Oyster 49. Goose Neck.The Oyster 49 Project. Refinish. New Standing Rigging. New Running Rigging. Fully Serviced Hood in-mast furler. New Boom Goose Neck. New Mainsheet Bail. New custom Vang Lug. New Spinnaker Crane Gussets. All Made Custom Here in House!
Valiant 42
Valiant 42 Traveler Bridge RefinishValiant 42 Traveler Bridge RefinishValiant 42 Traveler Bridge Refinish…Ready to Bolt On.
Custom Reef Line Fair Lead. Valiant 42
Valiant 42 Refinish UnderwayValiant 42 Spreaders Back from Paint.Complete Rod Service. All New Electrical. Complete Mast Re-finish. New Single Line Reef System. New Tri-sail track. New Tides Marine Strong Track. New TRC Preventer System. Valiant 42.How to Lay-out a Masthead. Valiant 42The Valiant 42 Project. Final Touches.The Valiant 42 Project. Final Touches.The Valiant 42 Project. Final Touches.
Our Very Own Lazy Jacks.
Tartan 10 Spreader Repair
Tartan 10 Spreaders Repaired #ANewLeaseOnLife
J-42 Carbon Mast Refinish
J 42 Brand New Deck Collar. Ready to go on. Not many more of these left.
Mast Step Bermuda Bolt Mod. Ready to be Installed. J-42
Beautiful Carbon Fiber Mast Restoration Project Complete. New Standing Rigging. New Spreader Glassed in Spreader Base Doublers. New Tri-sail Track. New Stay-sail and Runner Provisions. New Outhaul. New Single Line Reefing. New Boom TRC Boom Preventer System. New Bermuda Bolt. Ready for the Big Trip. J-42
O’day Anchor Roller and Stem Fitting Repair
Cuttinng the Old Pieces Precisley to Fit the New Base Plate by TRCWater Jetting Done by KATO MarineThe Finished Product Transformed by the Creative Minds of TRC and KATO Marine. O’ Day 36.
Custom Selden GBS Bow Sprit
A Custom Bow Sprit Solution for a Beneteau 310 by TRC
Even the Little Guys Need Rigging…
Pearsn 30 with a Brand New Harken Over-the-Cabin-Top Traveler.
Broken Strand on an Upper Shroud. Harbor 20
The Oyster 485 Project
Oyster 485 Project Complete. We Reconfigured the Entire Main Sheet System and Traveler. Added a custom Stainless Steel Bow Sprit with Top Down and Code Zero Furler. Replaced all of the Standing Rigging. Removed and Re-installed all of the chain plates and much, much more. Ask one of our Experienced Sales Staff for more Information and Pictures…
Paint Prep Under Way…Oyster 485
Just Another Vang…
Another Forespar Yacht Rod, Serviced and Re-finished. TRC Style. Tartan 4300
The Park Avenue Boom Project
Carbon Pocket Boom Project. Tartan 3700 to C&C 110
Custom Outhaul Toggle. Made by TRC. C&C 110
After the Boom was Cut into Two Pieces, we had to Lay a Fiberglass Reinforcement for the new MS Bails. C&C110 from Tartan 3500
Filling exisitng Holes and Slots. Tartan 3700 to C&C110
The Outside Shell. Ready to be Glued Back Together. C&C110
Tartan 3700 Park Avenue Boom Becoming the C&C110 Boom
Primer. Let’s Fair This Thing…C&C110
Ready for Sanding. C&C 110
Two Tone. The Orca! C&C 110
Back from Paint. C&C 110
Mmmmm the Boom Bracket Doesn’t Fit. Ernieeeeeee!!!!!!!!
No Woarries Mate!!! We’ll Sort it Out. C&C 110 to Tartan 3700 Conversion Underway……
That oughta do it. C&C 110
Looks Like we Never Touched it. C&C110
TA-DA!!! Fits Like a Glove. C&C 110
Forspar Yacht Rod, The Rigging Company Style. C&C110
It’s……
….ALIVE>>>>
BOOM!
TRC Preventers are The Best. C&C110
The Rigging Company. Job Complete!
Some Wire to Rope Splices and Some More Projects…
Sometimes You Still Have to Wire Rope Splice.
Beneteau 393 with a Brand New In-Mast Furling Mast from US Spars in Gainesville Florida. Provided and Assembled by TRC.Custom Aluminum Spreaders Made by Sean Simmons of The Rigging Company. Morgan OI 41
Omega 36 Chain Plate Project….Omega 36 Chain Plate Project….Omega 36 Chain Plate Project….Omega 36 Chain Plate Project….Omega 36 Brand New Running Rigging….Omega 36 Brand New Running Rigging….Omega 36 Brand New Synthetic BackstaySparcraft Mast Custom DoublerCharleston Spars SparcraftNew Electrical for Sparcraft SparsMast is Ready to Step SparcraftSparcraft Spars done The Rigging Company Way. Omega 36.Brand Harken Carbo Foil. Omega 36.Omega 36 in all of it’s Glory….Sparcraft and The Rigging CompanyStalok and The Rigging Company. Custom ChainplatesComplete Harken Ball Bearing Spinnaker Pole Car Mast SystemA New Lease on Life. SSI Mast Boots Done the Right Way.Omega 36……Ready to Sail!
The Witchcraft Project
New Solid Bronze Turnbuckles. B.B. Crownenshield 60′Hayn Marine Makes Some Great Turnbuckles!!1903 Sailing Yacht with Some New TurnbucklesThe Yacht WitchcraftA Perfect Fit……for a Prefect Day!
The Rhodes Reliant Project
Brand New Sitka Spruce Rhodes Reliant Mizzen SpreadersEpoxy and AwlGrip Finishes. Rhodes Reliant 40Rhodes Reliant 40 Radar bracket on Mizzen Mast
Custom Anchor Snubber Bridle
Anchor Snubber Anyone? Formosa 42
The Swan 431 Re-fit
Swan 431 with New Rod, New electrical, Chainplate Service, New Electrcial Fixtures, Re-configured and re-purposed mast lines. SWAN 431 After Stepping. Tidewater Havre De Grace…We Work Anywhere!Another Great Mast Boot Job. Guaranteed Not to Leak. Swan 43Looking Good!Brand New Rod Rigging. Swan 431Completely Serviced Harken Pole Control System. New Ball Bearings and Aluminum Ends for the Harken Pole Car. New Blocks and New Cleats. Swan 431Swan 43 New Running Rigging and New Spinlock Rope Clutches XCS
Taswell 49 Project. Paint Prep Under Way.Bert Jabin’s…the Best.Getting Her on the Boat….Stepping the Mast. Taswell 49She’s Almost In…Brand New Leisure Furl Boom. Taswell 49 Project.The Rigging Company and Bert Jabin’s Working Together Craning on the New LF Boom. Hanging the Brand New Leisure Furl with Crane. Taswell 49Free Climbing Mast. Taswell 49.
Sometimes you don’t have a halyard to go aloft… That’s why you need to go aloft ;-0). Taswell 49 Project.
[wpvideo ai7ImriT]
Hinckley B-40. A Custom TRC Spar System
Spotted!! One of Our Very Own Custom Spars. Looking Sharp!
The Sabre 38 #2
New Rod Rigging, Running Rigging, Boom Preventer System, AwlGrip Paint Job, New Harken MKIV furler, and a New Lease on Life. Sabre 38 Re-fit.
Dufour 36 e Performance Boost!
Sabre 38 Project #1
Sabre 38. New Paint Job. New Harken Traveler. New Running Rigging. New BSI Rod Rigging. New Deck Collar and Mast Base Turning Block Pad Eyes. Reconfigure Boom Preventer System, TRC Style. New 3rd Reef Line. Reconfigure Single Line Reef System. Custom Leather Spreader Boots and Turnbuckle Covers.New Harken/ Schaefer Traveler SystemTRC Boom Preventer SystemThe Rigging Company’s “On-the-mast Whisker Pole System”
Amel Sharki
Amel Sharki Furler Service
New Mast for the International 505 Dinghy
505 Class Dinghy. New Mast with Doublers to Convert the Trap Twinings to the New Auto Twining System505 Class Dinghy. New Mast with Doublers to Convert the Trap Twinings to the New Auto Twining System
Hylas 54
Hylas 49. New Running Rigging. Freshly Painted In-mast Furler Motor. New Running Rigging. New LED Tr-anchor Light, Spreader Lights, and Foredeck Light. New Harken Electric Powered Primary Winches. New Harken Main Halyard Winch. Ready to Set Sail.
THE SHOP!
The Rigging Company Annapolis New Shop
THE BOAT SHOW!
Forespar Leisure Furl Display at The Rigging Company
The Early Days….
Beneteau 40. New TRC Boom Preveneter System. New Running Rigging. New Tides Marine Strong Track. New Outhaul and Reef Lines. Complete Winch Service.
J 110 Carbon Spars Underway…Need your mast unstepped for transport or just having the hull painted? Give us a call, we’ll even wash it before she goes back up. Bristol 45.5New Standing Rigging. New Chainplates. New Lifelines. New Electrical. A rare Bristol 41.1 leaving the dock. Happy trails!!!We Do Custom Leather Work. Spreader Boots for Sabre 38!We are up to something and we’re not telling….What could it be? #TraditionalRiggingOyster 485 with Some Running Rigging. Ready to go to the Islands before the big winter. Oyster 485A New Backstay using Compact Strand 1×19, Hayn Hi-mod Failsafe Insulators. Maintaining the Oyster Yachts Factory Spec’sPutting on the New Backstay. Oyster Yachts 485Introducing the nicest 24 footer in the world! New Selden Mast, New Harken Headsail Furlers, New Running Rigging, New Electrical Package, a New Leisure Furl Furling Mainsail, Painted AwlGrip “Eggshell White”, along with ALL of the Fixins’. Pacific Seacraft Dana 24. Sails Provided by our Friends at Chesapeake Sailmakers.Leisure Furl for a 24 footer !!?? You betcha. Pacific Seacraft DanaThe Rigging Company Strikes Again. Pacific Seacraft Dana with ALL New Rigging!Selden removeable bow sprit and new Top Down Furler. Beneteau 50Selden removeable sprit with 2:1 tack line done the simple way. Beneteau 50Beneteau 50 with a brand new top down furler rig. In the stowed position. Beneteau 50 with a Top Down furler and removable bow sprit under sail. Thanks to Photo Boat.New Harken Furler and Harken Hydraulic Backstay Adjuster. Delphia 40New Harken Furler and Harken Hydraulic Backstay Adjuster. Delphia 40
Sonoma 30. New Upper Shroud Tangs and Masthead Spinnaker Sheave Box w/ Custom Riveted and Glued Doubler. New Standing Rigging. New Shroud Chainplates. New Mast Step On Custom Anodized Riser. New Main Halyard and Jib Halyard Sheaves.
Standing Rigging, Running Rigging, New Masthead Sheaves (courtesy of our friends at Zephyrwerks), Chainplate and Mast Tang Service and Inspection. Tartan 34 C. Mail us Your Rigging and we’ll Mail You the New Stuff Back!
Boom Preventer Control Line Properly Configured (the blue line). The Tartan ProjectStow the Preventer Control Line Near the Shrouds for Easy Access. The Tartan ProjectPreventer Boom Pendant. The Tartan ProjectAll Done. Tartan 3700 with a New Lease on Life. Man That’s Shiny!
Another O’day Bow-Stem Fitting Completely Refurbished!
New Bearings with Some Custom Touches. A Complete In-mast Furler Overhaul. Morgan 34An Old In-mast Furler with a New Look. Newly Hard Coat Anodized Parts. Wait ‘Till it’s Done…Morgan 34The Bench Test! In-mast Furler. Morgan 34…
How it all Started for Me. The New but Already Getting Older Every Year, Navy 44’s.
Check Out Some of Our New Kits……..the T.R.C. Boom Preventer Kit!T.R.C. Spare Stay Kit.T.R.C. Lazy Jack Kit!
Jimmie Cockerill and Sean Simmons…..Workin’ in the Rain!Stepping in the Rain. Benteau 411Beneteau 411. All New LED Lights. New VHF Antenna. New Conduit. New Standing Rigging. New AWI. All Set!A Custom Anchor Light Riser with Wiring Hause. Pretty Neat! Beneteau 411Benteau 411 Stepped!Pole In!Pole Out!Spliced Directly to the Bow!Code 0, No Problem! Check Out Our Custom T.R.C. Retractable Bob-stay. Dufour 36e PerformanceWe had to Drill the End Cap and Use the Tack Line Fair Lead Thru-bolt as the Anchor for the Shock Chord and the Stay. Dufour 36e PerformanceNew Spreader Base Doublers for a Tighter Fit! Tartan 3700New Spreader Base Doublers for a Tighter Fit! Tartan 3700
A Beautiful Overhaul on a Beautiful Little Boat. Morris 26.
New Standing Rigging. New Running Rigging. New Furler. New Lifelines. New Spinnaker Gear. New Chainplates. New Electrical Package. Ready to Be Stepped. Morris 26.
Morris 26 Sailing Away!Hinckley B 40 Ready to Step!Steeping the Mast. Hinckley B 40Hinckley Bermuda 40. Goin’ Up….Final Touches on the Newly Built Hinckley Mast. It is Almost Time to go Sailing!
The Baba 35 Project is Complete. A Top Quality AwlGrip Spar Finish, New Internalized halyards, Reconfigured Boom, and a Complete On-The-Mast Whisker Pole System.
Douglas Fir and Sitka Spruce Spreaders and Parts and Pieces. Epoxy Coated, Prepped and Ready for the Clear Coat.Sitka Spruce Mizzen Mast Ready for Clear AwlGrip. After the Clear Coat Courtesy of Annapolis Yacht Finishes. Rhodes Reliant Mizzen.Putting Her Back TogetherThe Completed Masthead.Lower Jumper Tang and Spreader/ Lower Shroud Bracket. It’s like a Frankenstein.Jumper Strut and Runner Tang. Serviced Andersen Winches. New Mainsail Track, New Spreaders.Ready to be Stepped!Lagoon 620. Basic Inspection and Hydraulics Troubleshooting for the Bamar Headsail Furlers, Tenderlift System as well as the Pasarelle Gang PlankHinckley Yachts Bermuda 40 Sloop. New Custom Mast Build Continued. Everything is welded Up and In. A Few More Holes, Some Sand Paper, and an Acid Bath and it’s Off to the Paint Booth!We Utilize the Through-bar method to Affix the Spreaders. We Put the Spar Under Compression Before Drilling for Spreader Pins to Ensure a Tight Fit. Hinckley Bermuda 40.Custom Tapered Spreader for Discontinuous or Linked Rigging. Ready to be Welded. Hinckley Bermuda 40 SloopFinishing the Cut-outs for Internlizing Halyards. Baba 35.Tipping West System w/ Special Coatings Hardener for Clear Finishes Makes for Less Sanding. Rhodes Reliant Mizzen Mast.New Custom Harken Traveler System, Led Aft. New Lifeline Gates w/ Braces. New Main Sheet Block and Tackle. Bristol 29.9Some of Our Projects After AwlGrip. Looking Good! Baba 35 (Prairie Beige) and Hinckley B40 Sloop (Matterhorn White)We Always Recondition the Old Hardware if it’s Re-usable. Hinckley B40 Outhaul Track and Car.Dr. LED “Kevin” Spreader Lights. Freshly Installed. Baba 35Hinckley Bermuda 40 Sloop. Painted and Assembled.More Hinckley B40. Man I like Those Passagemaker Tangs!Our Spar Trailer All Rigged up and Ready for Delivery. Hinckley Bermuda 40.Complete Overhaul. New Standing Rigging. New Harken Furler. New Running Rigging. New Electrical Package. Pearson 36 PilotA TOTALLY Re-vamped Pearson Pilot 36….don’t see many of these!New Tapered Spinnsheet. Omega 36
Adding Purchase to Harken Jib Lead System Can Be Tricky
We Don’t Do Wood Often….but when we do. It’s real nice! Rhodes Reliant.
A New Mast Key/ Bottom End. The Old One was Rotten. Rhodes Reliant.
Smith’s Penetrating Epoxy. Then West System w/ Special Coatings Hardener. Then Awl Grip HIgh Gloss Clear for UV protection. Rhodes Reliant.
On the Way from the Paint Booth to the Assembly Line. Rhodes Reliant.
Custom Tapered Spar. Check out our Brand New Aluminum I-Beam Taper Spar!. Hinckley Bermuda 40 Sloop
Custom Mast Head. Designed by The Rigging Company. Hinckley 40 Bermuda Sloop
Check out our new The Rigging Company T shirts! Come by and get one they’re FREE!!!
We’ll Even Make You a Custom Sailboat Mast Hostess Stand. Wood Finishes by Boat Shine. Woodwork by Stem to Stern Yacht Service. Visit the Eastport Yacht Club for a Closer Look!….it even has spreader lights…Completely Restored Mast. New Spreader Light. New steaming Light. LED Anchor light. Irwin 38Converted from In-boom Furling to Conventional Single Line Reef Mainsail System….an unusual retrofit but it turned out nice! Irwin 38.New Selden GBS Removable Bow Sprit. A Perfect Solution for Cruisers. Look at how we Remedy the Tack Line Issue!. Catalina 27.Custom Gooseneck and Vang Brackets and Toggles to be Welded on! Notice the Stainless Steel Bushings for a Prolonged Life. Irwin 38The World’s Nicest Catalina 27. Painted Super Jet Black with Bright Aluminum Ends. We Added a Link Plate to raise the Drum Off of the deck for clearance for the Selden Sprit. New Life Lines with Custom Black Cushions To Match. New Spreaders and Much …..Much More!I never thought I could be so little! Aloft on a Tayana 55.Final Touches Before Stepping. 2 VHF Antenna’s (spaced 3′ apart). OGM LED TriAnchor Light. Windex and T.R.C. Tang. A Cell Phone Extender. Baba 40Sean Simmons and the Completely Overhauled Baba 40. Custom Two-Tone Paint Job. New Standing Rigging. Fully Refurbished Pro Furl Furlers. Internalized Halyards. New Tides Marine Strong Track. New Electronics. New T.R.C. 4-Leg Lazy Jacks.Ready for New Standing Rigging. Baba 40 (as well as a few others)Aluminum Masts Should Not HAve Wooden Spreaders. Cal 27Custom Aluminum Spreaders. Cal 27.Corroded Mast Step? No Problem, we’ll just make a new one. Baba 40Just some shop art…New Synthetic Backstay and Powder Coated Backstay Flicker. Telstar 28 Tri-maranNew US Spars Boom w/ Custom Tack Pin w/ Slab Reef HookNew Outhaul w/ Internal 4:1 Purchase. New 3:1 Cunningham (the green line), Harken Bullet Swivel w/ Becket trough Harken Bullet Cheek Block to 29m Pivoting Cam Block. Telstar 28 Tri-maranTelstar 28 Trimaran; New Boom w/ Outhaul and Slab Reef Configuration, New Top-Down Furler w/ Furling Line and Double Lead Block w/ Snap Shackle Attachement, New Halyards, New 10:1 Synthetic Backstay w/ Flicker, New Jib Lead Turning Block Configuration, New 3:1 Cunningham, and a New Running Traveler Rig 3:1!Backstay Control Reconfigured from 8:1 to 10:1. 40mm Harken Carbo Fiddle Block w/ Becket to 40m Harken Carbo Fiddle Block. 40mm Harken Carbo Single Block lashed to Stanchion to Turn Line Up to the New Cleat Position. It Just Misses the Aft Lazarette! Telstar 28 Tri-maranSchaefer Pin Stop (extremely curved track) Traveler Converted to 3:1 Line Control. 40mm Harken Carbo Fixed Single Block @ the Car to a 40mm Harken Carbo Fiddle w/ Cam. A Simple Solution for a Not so Simple Problem. Telstar 28 Tri-maran.New Harken Furler, New Standing Rigging, New Running Rigging, New Chain Plates, 3 Leg Lazy Jack Kit, and a few custom touches……..Cabo Rico 38The Rigging Company Lazy Jacks in the Stowed Position. Cabo Rico 38A Brand New Harken MKIV Headsail Furler. Cabo Rico 38. The customer did quite a nice job on that sprit if I may add…..New Custom Chain Plates. Moved from Inside the Hull and Custom Mounted Outside the Hull. Formosa 41 KetchComplete Wooden Spar Refurbishment, Main and Mizzen Using Epoxy and Awlgrip. All New Spreaders. All New Chainplates. Formosa 41 Ketch. Classic Spars with Modern Finishes!Bert Jabin’s Yacht Yard. The Best Place in the Mid-Atlantic to Have Your Mast Stepped.Custom Elk-hyde Spreader Boots. Laced and Ready to be Stepped. Formosa 41.Ash Blocks. Before & After. Formosa 41 KetchMid Assembly and Looking Good! Formosa 41 KetchDas Boot! It’s all in the details…..AwlGrip Finish! Formosa 41.How to Move a Mast the Easy WayBrand New Chain Plates, in-the-works. Formosa 41 Ketch and Cabo Rico 38Brand New Chain Plates. Before and After. Cabo Rico 38Refinishing Wooden Spars. Formosa 41 KetchWooden Spars were First Repaired, Sealed with Penetrating Epoxy and then Epoxy Primer to Get it Ready for Awl Grip. Formosa 41 KetchNew Spreaders from Douglas Fir. Formosa 41 Ketch.A Brand New Hood SL 808. I am Beginning to Like These Furlers More and More. Catalina 34 MKILift, clean and Reseal the Deck Ring, Bristol 43A New Head-stay Hound for a Seasprite 23. Even the little guys get the royal treatment at T.R.C.Brand new Lewmar Adjustable Jib Lead, Cleating Arrangement. Passport 456 Aft CockpitLewmar 2:1 Jib Lead Car W/ Custom Stand Up. Passport 456 Aft CockpitNew Lewmar Adjustable Jib Lead. Passport 456 Aft CockpitOday 34 Re-rig and Chainplate Service, New lines and Electrical. Good to go for a while.Brand New Hayn Turnbuckles and Navtec Stemballs. Oday 34Frers 38. Rig Up!Brand New Dinghy Davits! Catalina 400Gerhauer Dinghy Davits, Custom Installed by The Rigging Company!We Package Masts for Transport Too!Aloft on a Passport 456. Cloudy, cloudy days…New Harken Traveler, New Running Rigging, New outhaul, New Main Sheet Configuration, New Vang Configuration, and a Newly Rigged Single Line Reef System. Catalina 27.Having Some Fun with the Boat Shine Crew, helping Matt Rutherford get his Motor Schooner Ready for his big Atlantic Voyage. Good Luck Matt!Complete Rod Service. Stepping a J105 in the Rain.The World’s Nicest Pearson 26 OD!. New Halyards, New Standing Rigging, Chain Plate and Mast Step Service, Internalized Halyards, New Lifeline Gates and Gate Braces, New Harken Traveler w/ Windward Sheeting Car, New Selden Boom, New Harken Genoa Furler, New Lewmar Primaries, The Rigging Company 3-Leg Lazy Jack Kit, All New Electrical, New Selden Removable Bowsprit, and a “Partridge in Pear Tree”Brand New Mast Chocks. Done Right! Peterson 44.A Brand New Paint Job, Re-rig, and New Headsail Furler……Getting Stepped! Peterson 44.CompleteForespar Whisker Pole On-the-mast System by The Rigging Company. Peterson 44.A New Selden Mast, New Harken Furler, New Selden Boom w/ Single Line Reefs and Internal Outhaul System, All New Standing Rigging (converted to discontinuous/linked style), New Halyard Package, All New Electrical, New Selden Deck Ring, New Selden Mast Step…….the WORKS! Yamaha 36A Brand New Selden Conventional Mast. Yamaha 36Installing a New Mast Step.Yamaha 36Positioning the New Mast Step. Yamaha 36.A New Mast Step Properly Installed. Ready for the Mast. Yamaha 36Fitting the New Deck Ring for the New Mast. Yamaha 36Sometimes We Have to do Some Fiberglass Work to Make Things Fit. A New Selden Deck Ring. Yamaha 36Another Beautifully Installed Boot and Mast Collar by The Rigging Company. Storm Tested and Not a Drop.A New Boom for a Pacific Seacraft 24. Primer. I actually like that color…..Pacific Seacraft 24 Dana. New boom, Painted Awl Grip Cream with 2 single line reefs, 4:1 internal outhaul, and custom 3/8″ x 1/2″ boom toggle w/ bushing.New Outhaul System for Benteau 49. Before.New Outhaul System for Benteau 49. During.New Outhaul System for Benteau 49. After. Ta-da!Peterson 44 New “at-the-mast” Reefing SystemNew On-the-mast Halyard System; Halyard Winches, Winch Bases, Rope Clutches and Horn Cleats, Eliminate the Old School Winch Farm. Plus A New Track, Car, Control Tackle and Storage Chock and Ring for a Complete On-the-mast Whisker Pole System. Peterson 44Wire Wheeled Spreaders and Some Freshly Painted Spreader Bases. They Where Green with MildeEWWWWW!Mast Head with Machined-in Slots For Internalizing Halyards. Pearson 26Pearson 26 Mast Step With Proper Drain Holes and Ready to Have New Hause Pipe Welded to Accommodate Electrical Wires and to Prevent Water from Penetrating the Deck.All Parts and Pieces Inspected, Cleaned Up and Ready to be Re-installed. Peterson 44, Paint Job.Sean Simmons Rides the “Sky-Hook”! Ya Gotta Get Up There Somehow….Don’t Forget the Million Little Parts and PiecesThe Acid Bath! …..then we coat it with a special solution which protects the aluminum from corrosion for approx. 24 hours…..Catalina 30, Re-rig, Electrical, New Spreaders, New Harken Furler and a Chain Plate Service. Better Than it Has Ever Been.Catalina 30Benetau 50 with Stainless Steel ‘Key and Tenon’ Style Mast Step. A Sure Recipe for Immense Corrosion. Make Sure You Unstep that Mast about Every 5 Years or So.Mast Finishes by The Rigging Company!Mast Electrical Package; LED Anchor Light by OGM, A New Series 40 Deck/Steam Combo Light by Aqua Signal, A Hailer by Standard Horizon, Sealed Beam Spreader Lights by Perko, and 4 LED Blue Blaze Mast Accent Lights by West Marine. Benteau 50A Glossy Finish For a New Lease on Life. Beneteau 50Always Make Sure You Scrape Those Die Lines. Details Make All The Difference.A Properly Prepped Mast Ready for Acid Bath and then PaintNew Hiking Cushions and Spinnaker Block “Keeper Uppers” – J92s – NICE!How Sport Boat Life Lines Should be Lashed, with Spectra and Heat Shrink!Spectra Turnbuckle Lashings, Only Acceptable in Some Configurations…..Headstay Furler to Dyform Hank-on Conversion with New Tack Fitting, J92sWow What a Finish!We are so proud to be a part of this :-0)Yacht Witchcraft at the U.S. Boat ShowA Fair Lead using Schaefer’s Big Over-the-stanchion Lead BlocksNew Sta-sail Furler On a Taswell 44Freshly Painted, Re-rigged, New Halyards and Electrical, Sabre 43. Man that’s shiny!Another Perfectly Installed Mast BootTotally Restored Forespar Vang w/ New Spring, The Rigging Company Style.Sean Simmons Working Hard to Get the Mast Ready to StepTotally Refurbished Aluminum Stem Fitting, O’day 34. Looks New!O’Day 34 Aluminum Anodized Stem Fitting, AfterO’Day 34 Stem Fitting, BeforeCustom Fitting To Adapt Gibb Shroud Terminal to Eye-Jaw ToggleNew Selden 300S Sta-Sail Furler, Hylas 49Core Dependent Eye Splice To ‘T’-RingNew synthetic runner ready to install, Hylas 49New Isomat Spreader Bushings for a Tight Fit and Just a Dab of Silicone on the Spreader Pins. Ready to Step!Custom Steaming Light MountO’day 34, Standing Rigging, Running Rigging, Mast Electrical, and Chain Plate Replacement w/ New Harken Cruising Unit 1 FurlerAdding Spinnaker Sheet Turning Blocks to a Hunter 39.Selden Top Down Furler and Removable Sprit, Installed by The Rigging Company!Top Down Furler Furling Line Lead. Hunter 39.Removable Bow Sprit and Top Down Furler Rig. Hunter 39Traditionally Rigged 2:1 Halyard, Spliced, Parceled and Served!New Running Rigging on a 109 Year Old 60′ Sloop!A Proper Throat Seizing and a Cow Hitch!Upper Chain Plate Sealed and Installed.Upper Shroud Chain Plate, Dry Fitted On a Catalina 36! Always Replace the Fasteners….Chain Plates Services, Inspected and Ready to Install!How To Seize A Spreader EndA properly installed mast boot, from SSI.Complete Mast Refurbishment Hunter 34Mast Refinish – Paint Prep!The Rigging Company’s Lazy Jack System. Does NOT require the mainsail cover to be modified!Leisure Furl Goose Neck Assembly 2012Anodized Forespar Leisure Furl Installed By The Rigging Company On a Catalina 40T.R.C.’S Custom lashed lifting and down-haul ring. LIGHT AIR ONLY!T.R.C. Presents our custom retractable bridle. Look MA no shock chord! ~J-29 Complete spinnaker pole refurbishment~.New Ball Bearing Mast Base Turning BlocksNew Custom Milled And Welded Spreader EndsBrand New Tip Cups And Rod Replacement, Farr 40Our New Hats!We Have Koozies TOO!Complete Running Rigging Package2 Vhf Antennae, OGM LED Tri-cholor/ Anchor Light, Aparrent Wind Instrument, Digital Camera, and WindexTV Antenna, Hailer, Radar, Radar Reflector, Deck/ Steam Light, And spreader LightsComplete Spar Restoration PackageComplete Mast Refurbishment Package – ‘Mid-assembly’ –Custom Hailer Mount For SpreaderSean Picking Up Mast From Paint ShopCustom Paint Job!Sean Simmons Finishing Touches on a Brand New Leisure FurlRope Work New Navy 44Complete Mast and Rigging Refurbishment, Whitby 42Complete Spar Build and Complete Deck Lay-out New Navy 44Catana 52 Wing Boom Re-finish!Jimmie Cockerill Hard at Work!This is What it Looks Like if a Halyard Knots Itself Inside of Mast Yikes!Brand Spankin’ New Navy 44 Hits a Bridge on the CnD Cannal. “Guess They are Going to Need a NEW one..We don’t do rudders but I was really proud of this one. Totally Refurbished Pearson Flyer Rudder, Looks Like NEW!Jimmie Cockerill Working Aloft!They Used to Make Boats in Cockeysville?Jimmie at the mast and Sean trimming at the J-24 East Coast ChampionshipsJimmie Refinishing a 70′ Spruce Spar from the Early 1930’sHow Did Ya’ll Get It so Shiny!Witchcraft’s Mast is Ready to Step80 Year Old Sitka Spruce Mast Meets new School West System Epoxy and Awl Grip. Looks brand New!Jimmie and Sean, After Hours…… that is epoxy not ketchup on my shirt. Okay there is some ketchup.Custom Splicing WorkJimmie on the Bow at the Screwpile Lighthouse Challenge, A 1st Place Finish.Replacing Rotten Planks On a 108 Year Old Day Sailor. Chain Plate Covers Anyone?J-35 Mast RefinishMore Custom SplicingThe Riggers Dock Cart……………………
Has one of our sales staff already contacted yoU? You would look towards the OEM mast manufacturer for this. For which we are dealers. Please connect with Brad@theriggingco.com or call 443-847-1004; for pricing and lead times. He should have that information available for you today.
I think that is a great idea. I mean it really all boils down to how much you need that thing for sailing. If the answer is not much, than I vote for…take it out of there and see how you like it.
we are looking for replacements for the ” stemball” This “stemball” style socket was originally designed and manufactured in house for Hinckley Sailboats.
I know the Hinckley’s well but don’t know the stem ball that you are asking about. Is this for the standing rigging? Can you send us a picture to Aaron@theriggingco.com along with some measurements?
I just sold a different Cabo Rico 38 from 1988 and I love what you’ve done with the one here. The mast re-rig looks beautiful. Any major concern areas that you found on the rigging?
Hi Aaron, thanks for the comment and the compliments. The Cabo Rico 38 is a nice solid boat. Along with the standing and running rigging replacement there where a few things that popped up:
When we un-stepped the mast, there was heavy corrosion around the mast step and deck collar. The deck collar had to be removed with the mast, during the un-step, to lift the spar without damaging the deck. The mast butt needed to be trimmed to remove corrosion which was compromising the structure of the spar at the step. The mast step and deck collar were both cleaned up, re-anodized, and salvaged nicely.
We replaced the chainplates as per the customer’s request. Although I don’t think they showed any signs of cracking or failure, they were replaced do to concerns of fatigue from mileage and use.
Lastly, we replaced all of the sheaves in the stay-sail boom, main boom and the mast due to UV degredation. We also replaced the large hollow (tubing style) sheave pins in the masthead, as they were out-of-round, with solid machined pins. These are common problems with the Isomat Spars but can be resolved without much ado.
HI Jimmie, You and Sean have an impressive website! A picture says a thousand words; passion, dedication, education. We will be in touch. Cheers, Lisa Bardarson/Jon Reichlin Vessel Bright Star
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
Do you sell Selden Furlex gease for roller furling systerm?
We do not..however, this should help:
https://www.fisheriessupply.com/selden-mast-lubricating-grease-312-501
~T.R.C.
About how much did the SS chainplate backing plates for that Ericson 32 run? I would like to have one made for my boat.
Hi Andrew,
We just got another email asking the same question. Here was the reply…
“The rods and and backing plates may come in around $350 each for both, rod and backing plate.
Yes, you would need to send us the old rods and backing plates for duplication.”
Thanks for the inquiry.
Regards,
~T.R.C.
Need mast for oceanis beneteau 38 2015
Any suggestions of where to look?
Thank you
Jose Caballero
T. 787-370-0030
Right here! We’ll get you some info today.
Hi Jose,
Has one of our sales staff already contacted yoU? You would look towards the OEM mast manufacturer for this. For which we are dealers. Please connect with Brad@theriggingco.com or call 443-847-1004; for pricing and lead times. He should have that information available for you today.
Thanks for choosing TRC.
Hi, Im thinking of removing the mizzen permanently from a Formosa 41 … want more uncluttered deck space, would you have any advice on this idea … ?
Hi Brad,
I think that is a great idea. I mean it really all boils down to how much you need that thing for sailing. If the answer is not much, than I vote for…take it out of there and see how you like it.
Good Luck,
~T.R.C.
we are looking for replacements for the ” stemball” This “stemball” style socket was originally designed and manufactured in house for Hinckley Sailboats.
I know the Hinckley’s well but don’t know the stem ball that you are asking about. Is this for the standing rigging? Can you send us a picture to Aaron@theriggingco.com along with some measurements?
~T.R.C.
looking for a new or used mast step for my 1973 Ranger 29. The mast looks original.
There are certainly reasonable solutions available to you for this.
Are there any markings on the spar anywhere that can be used to identify the manufacturer?
You can send us some pictures via email at Jimmie@theriggingco.com we’d be glad to help you further.
This blog was… how do I say it? Relevant!! Finally I have found
something that helped me. Appreciate it!
I just sold a different Cabo Rico 38 from 1988 and I love what you’ve done with the one here. The mast re-rig looks beautiful. Any major concern areas that you found on the rigging?
Hi Aaron, thanks for the comment and the compliments. The Cabo Rico 38 is a nice solid boat. Along with the standing and running rigging replacement there where a few things that popped up:
When we un-stepped the mast, there was heavy corrosion around the mast step and deck collar. The deck collar had to be removed with the mast, during the un-step, to lift the spar without damaging the deck. The mast butt needed to be trimmed to remove corrosion which was compromising the structure of the spar at the step. The mast step and deck collar were both cleaned up, re-anodized, and salvaged nicely.
We replaced the chainplates as per the customer’s request. Although I don’t think they showed any signs of cracking or failure, they were replaced do to concerns of fatigue from mileage and use.
Lastly, we replaced all of the sheaves in the stay-sail boom, main boom and the mast due to UV degredation. We also replaced the large hollow (tubing style) sheave pins in the masthead, as they were out-of-round, with solid machined pins. These are common problems with the Isomat Spars but can be resolved without much ado.
Hope this is helpful,
~T.R.C.
More pictures please,
Learned a few things on here.!
COMING…..:-0)
Great website!
Brooke – SpinSheet
Thanks!
HI Jimmie, You and Sean have an impressive website! A picture says a thousand words; passion, dedication, education. We will be in touch. Cheers, Lisa Bardarson/Jon Reichlin Vessel Bright Star
Hey, that’s really nice. Thanks a lot!