Showing 1–12 of 99 results
Also known as a Gibb Plug. Use the “T” Terminal backing plate rubber plugs with “T” Terminals. Rubber plug sizes correspond to the terminal wire sizes on the backing plates.
High Quality Swiss Made Felco Cable Cutters
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Handy Crimp hardware is for use in low-load applications only. When properly installed, these fittings develop approximately 70% of the strength of 7×7 cable matching the size of the fitting. For high load applications, professional machine swaging is recommended. The crimping process of this hardware is labor intensive and leaves three distinct crimp marks on…
Hayn gate eyes are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. All threads are left-hand threaded.
Hayn gate eyes are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire.
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin regardless of wire size. A- Jaw Depth: 1″ E- Jaw Gap: 5/16″
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin and 1/4-28 RH threads regardless of wire size. O- Open Length: 7-3/8″ C- Closed Length: 5-1/4″ A- Jaw Depth: 1-5/16″ E- Jaw Gap: 5/16″
Hayn lifeline toggle jaws are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of s or 1×9 wire. A deck toggle can be used wherever a cable needs to be terminated to a deck or bulkhead. 1/4″ wire fitting uses 7/32″ swage die. Pin diameter…
Machined from T316 Stainless Steel, Hayn Marine swage studs are polished to a mirror finish. Custom configurations available upon request.
Machined from T316 Stainless Steel, Hayn Marine swage studs are polished to a mirror finish. Custom configurations available upon request.
Hayn lifeline termination studs or “buttons” are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire.
Ronstan Utility Series 50 Fiddle Block, Universal Head
1 × $65.89
Ronstan Utility Series 50 Single Block with Becket, Universal Head
1 × $50.70Hayn Handy Crimp Tool
1 × $333.98 Subtotal: $450.57