Mainsheet Travelers


Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Line Diameter -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Track Size -

  • Show more

Showing 49–60 of 195 results

  • Harken 22mm Low-Beam Line Shedding Endstops

    Harken Line-Shedding Endstops – 22mm Low-Beam

    $13.95
    : $16.10 (13 %)

    These 22 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.

    Add to cartDone
  • Harken 22mm Low-Beam Line Shedding Endstops

    Harken Line-Shedding Endstops – 27mm Low-Beam

    $19.95
    : $22.75 (12 %)

    These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.

    Add to cartDone
  • Harken 13mm Endstop w Deadend

    Harken Low-Beam Endstops – 13mm w/Dead-End

    $10.95
    : $11.85 (8 %)

    Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm low-beam track.

    Add to cartDone
  • Harken 22mm Heavy Duty Endstops

    Harken Low-Beam Endstops – 22mm Heavy-Duty

    $37.95
    : $43.40 (13 %)

    Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.

    Add to cartDone
  • Harken 22mm Heavy Duty Endstops

    Harken Low-Beam Endstops – 27mm Heavy-Duty

    $38.95
    : $44.15 (12 %)

    Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.

    Add to cartDone
  • Harken 22mm Heavy Duty Endstops

    Harken Low-Beam Endstops – 32mm Heavy-Duty

    $47.95
    : $53.90 (11 %)

    Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.

    Add to cartDone
  • Harken 22mm Low-Beam Pinstop Track

    Harken Low-Beam Pinstop Track – 22mm

    Price range: $49.95 through $272.95
    : $56.70 – $309.70 (10 – 12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Harken 27mm Low-Beam Pinstop Track

    Harken Low-Beam Pinstop Track – 27mm

    Price range: $90.95 through $672.95
    : $103.45 – $765.00 (12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 27mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Harken 27mm Low-Beam Pinstop Tight Spacing 4" Mounting Holes

    Harken Low-Beam Pinstop Track – 27mm, Tight Pinstops, 4″ Hole Spacing

    Price range: $150.95 through $204.95
    : $171.00 – $232.35 (12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Harken 27mm Low-Beam Pinstop Track

    Harken Low-Beam Pinstop Track – 32mm

    Price range: $141.95 through $718.95
    : $161.65 – $817.00 (12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 3/8″ Flat-head screws. Additional lengths can be spliced together using the Harken 32mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Harken 32mm Low-Beam Track with 4" Spacing Diagram

    Harken Low-Beam Pinstop Track – 32mm, Extra Tight Pinstops

    $179.95
    : $204.40 (12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Additional lengths can be spliced together using the Harken 32mm track splice link. Mounting holes use 3-15/16″ spacing. Track has three pinstop holes between each mounting hole instead of the usual one hole per mounting hole. Track length is 1 meter….

    Add to cartDone
  • Harken 27mm Low-Beam Pinstop Tight Spacing 4" Mounting Holes

    Harken Low-Beam Pinstop Track – 32mm, Tight Pinstops, 4″ Hole Spacing

    Price range: $191.95 through $312.95
    : $218.05 – $355.10 (12 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead of the usual one hole…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
The Rigging Company
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.