Showing 181–192 of 195 results
Stand-up toggles hold blocks upright on travelers. Control tangs allow for the attachment of control blocks. This toggle will fit blocks and cars with either 5/16″ or 3/8″ (8mm or 10mm) pins. Height: 2-3/4″ Max working load: 7500lb Control block pin: 1/4″-6mm Accepted mainsheet blocks: Element 60mm doubles/triples, Element 80mm singles, Small Boat 3″ single/fiddle/midrange…
Harken Micro CB traveler cars are used on small dinghies and catamarans. Ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Add these control blocks to a 13mm Harken Traveler Car to create a 2:1 traveler. The sheaves roll…
Harken Micro CB traveler cars are used on small dinghies and catamarans. Ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Add these control tangs to a 13mm Harken Traveler Car to attach lines or blocks. Max working load:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 22mm car w/fixed sheaves & eyestrap, and a set of 22mm end controls w/block & cam cleats. Track & fasteners…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 22mm hi-load car w/pivoting toggle, two 29mm single carbo blocks for the car, and a set of 22mm end controls…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 27mm car w/shackle, blocks & dead-ends for a 3:1 purchase, and two a set of 27mm ESP end controls w/double…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 27mm car w/shackle & blocks, and a set of 22mm end controls w/blocks & cam cleats. Track & fasteners required,…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 32mm car w/shackle & blocks, and a set of 32mm ESP end controls w/blocks & cam cleats. Track & fasteners…
When end control assemblies are used, trim caps finish track ends. Use with Harken track 22mm high-beam track.
When end control assemblies are used, trim caps finish track ends. Use with Harken track 22mm low-beam track.
When end control assemblies are used, trim caps finish track ends. Use with Harken track 27mm high-beam track.
When end control assemblies are used, trim caps finish track ends. Use with Harken track 27mm low-beam track.
Harken Genoa Lead Car - 22mm for 4:1 Car Control
1 × $495.95
Harken Traveler Car - 13mm w/Loop for Soft Attachments
1 × $129.95Subtotal: $625.90