Showing 37–48 of 195 results
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. Track mounting holes are drilled with Harken’s legacy 4″ spacing to match older tracks. Harken Low-Beam tracks are designed to be mounted directly…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #8 Flat-head screws. Additional lengths can be spliced together using the Harken 13mm track splice link. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully supported along its entire length….
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Harken Low-Beam tracks are designed to be mounted directly to a deck…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 1/4″ hex-head bolts. Harken Low-Beam tracks are designed to be…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 5/16″ hex-head bolts. Harken Low-Beam tracks are designed to be…
Harken 57 mm T2 Soft-Attach Ratchamatic Block
1 × $87.95
Harken 57 mm Double Carbo Ratchamatic Block - Swivel
1 × $319.95
Harken 57 mm Ratchamatic Block - Swivel, Becket, Cam Cleat
1 × $225.95
Harken 57 mm Ratchamatic Block - Swivel
1 × $119.95
Harken Traveler Kit - 27mm, 4:1 Purchase
1 × $813.95
Harken Trim Caps - 32mm Low-Beam
1 × $18.95
Harken 38 mm Big Bullet Block - Swivel, Becket
1 × $51.95
Harken End Control - 22mm w/Cam Cleat
1 × $404.95Harken High-Beam Endstops - 22mm Heavy-Duty
1 × $50.95
Harken Trim Caps - 32mm High-Beam
1 × $24.95
Harken End Control - 32mm Hi-Load w/Double Sheaves
1 × $1,049.95Harken Endstops - 32mm Low-Beam "ESP Style" for Boatbuilders
1 × $21.95Subtotal: $3,191.40