Showing 25–36 of 71 results
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm high-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 1/4″ hex-head bolts. Harken Low-Beam tracks are designed to be…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 27mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 1/4″ flat-head screws, with pre-drilled holes spaced 3-15/16″ apart. Additional lengths can be spliced together using the Harken 27mm track splice link. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be…
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 27mm Low-Beam Pinstop Track. Length: 2-5/16″ Width: 1-15/16″ Height above track: 1-5/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 22mm Low-Beam Pinstop Track. Length: 3-1/2″ Width: 1-15/16″ Height: 2-3/8″ Max Working Load: 1984lbs Breaking Load: 3968lbs
Splice links join track sections and keep them aligned during installation.
Harken 75 mm Cheek Ratchet Block
1 × $104.95
Harken Traveler Car - 22mm Hi-Load w/Fixed Sheaves & Eyestrap
1 × $284.95
Harken 75 mm Carbo Ratchamatic Block - Swivel, Becket, Cam Cleat
1 × $326.95
Harken 75 mm Double Carbo Block - Swivel, Becket
1 × $207.95
Harken Traveler Car - 22mm w/Athwartships Loop for Soft Attachments
1 × $210.95
Harken End Control - 32mm Hi-Load
1 × $711.95
Harken Halyard Tensioner T-Track - 32mm
1 × $392.90
Harken Genoa Lead Car - 32mm Non-Captive-Bearing for 4:1 Car Control
1 × $1,801.95
Harken Traveler Car - 22mm Low Load Non-Captive-Bearing w/Pivoting Shackle
1 × $178.95
Harken Genoa Lead Car - 22mm for 2:1 Car Control
1 × $497.95Harken In-Mast Furling Outhaul Car - 27mm
1 × $497.95Subtotal: $5,217.40