Showing 169–180 of 259 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-9-16″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Designed for cockpit-mounted cruising installations and similar setups, traveler cars with Carbo-Cams allow traveler control cleating at the car instead of the track ends. On-car cleating paired with single-sheave end controls leave room for you to open the lazarette. They also increase purchase from 2:1 to 3:1 compared to systems trimmed from single-sheave end controls….
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-1/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-3/8″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-3/4″ Width: 4-1/8″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-3/4″ Width: 4-1/8″ Max line dia: 10mm – 3/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Linked double cars allow for higher working loads than individual cars. Length: 11″ Width: 3-11/32″ Height: 3-1/2″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Linked double cars allow for higher working loads than individual cars. Length: 15″ Width: 3-11/32″ Height: 3-1/2″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 32mm track. Linked double cars allow for higher working loads than individual cars. Length: 15″ Width: 3-5/8″ Height: 3-1/2″…
Harken Halyard Tensioner Slider Car - 40mm Single Pin
1 × $2,309.95
Harken Pinstop End Control - 32mm Threaded
1 × $397.95
Harken Traveler Car - 13mm w/Loop for Soft Attachments
1 × $129.95
Harken Pinstop End Control - 27mm w/Shackle
1 × $265.95Harken Traveler Car - 27mm w/Shackle & Cam Cleats
1 × $550.95Subtotal: $3,654.75
|
Uploaded
Failed
|
 |