Showing 145–156 of 257 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 5-3/16″ Width: 2-3/4″ Car body height: 2″ Max working load: 2300lbs Breaking load:…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 2-3/4″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-7/32″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-3/8″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken Reflex Stanchion-Mount Fairlead
2 × $31.95
Harken 2.25" Through-Deck Block
1 × $75.95
Harken End Control - 27mm ESP w/Double Sheave & Cam Cleat
1 × $492.95
Harken End Control - 32mm Hi-Load
1 × $711.95
Harken 37mm Forged Eyestrap
2 × $9.95
Harken 38mm Eyestrap - Double Fastener
1 × $11.95
Schaefer 7 Series Organizer Double - Aluminum
1 × $210.24
Harken End Control - 22mm w/Double Sheave
1 × $314.95
34ST Winch FS E1 Electric 24V
1 × $3,141.00
Harken Endstops - 22mm High-Beam
1 × $13.95
Harken End Control - 22mm w/Cam Cleat
1 × $404.95
Harken 23mm Composite Eyestrap Package of 6
1 × $14.95
Harken End Control - 32mm Hi-Load w/Double Sheaves
1 × $1,049.95
Harken End Control - 32mm
1 × $471.95Harken 30mm Composite Eyestrap package of 6
1 × $14.95
Harken 6mm Low-Load Folding Padeye
1 × $40.95
Harken 22 mm Micro Block - Becket
1 × $16.95
Harken 22 mm Fiddle Block - V-Jam, Becket
1 × $46.95
Harken 22 mm Block - Swivel
1 × $28.95
Harken Reflex Furling Lead Block Kit
1 × $192.95
Harken 22 mm Micro Block
1 × $14.95
Harken 18 mm Fly Soft-Attach Block
1 × $24.95
Harken 18 mm T2 Soft-Attach Double Block
1 × $42.95Subtotal: $7,423.09
|
Uploaded
Failed
|
 |