Downwind Sail Handling Parts and Accessories

Every part and accessory you need to maintain and enhance your downwind sailing experience.

filter products

Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Line Diameter -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Product Size

  • 1 Extra Large
  • 1 Large
  • 1 Medium
  • 1 Small

Showing 13–24 of 24 results

  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    From $187.20
    : $208.00 – $515.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    From $154.80
    : $172.00 – $388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Anti-Twist shackle

    Selden Anti-Twist shackle

    From $45.90
    : $51.00 – $105.00 (10 %)

    The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Bracket for masthead rigs(Selden ONLY)

    Bracket for masthead rigs(Selden ONLY)

    $438.30
    : $487.00 (10 %)

    To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….

    Add to cartDone
  • Colligo Standard Terminator

    Colligo Standard Terminator Fittings for Synthetic Rigging

    From $71.10
    : $79.00 – $249.00 (10 %)

    Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • harken 40mm double stanchion block

    Harken 40mm Double Stanchion-Mount Block

    $90.95
    : $113.65 (20 %)

    Harken® recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. Use the 7405 as an inboard lead for two lines, useful for continuous line furlers or cutter rigged boats with two furlers. Sheave dia: 1-9/16″ – 40mm Max line: 3/8″ – 10mm Max working load: 485lb – 220kg For use…

    Add to cartDone
  • harken reflex 57mm stanchion bungee block

    Harken Reflex 57mm Stanchion-Mount Bungee Block

    $60.14
    : $68.40 (12 %)

    Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Furling leads are offered separately or in complete kits. A Carbo T2 block with shockcord attaches aft of the double cam to keep line…

    Add to cartDone
  • harken reflex furling lead block kit

    Harken Reflex Furling Lead Block Kit

    $196.95
    : $223.55 (12 %)

    Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Two stanchion leads forward guide line outboard to keep sidedecks clear. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling…

    Add to cartDone
  • harken reflex double cam fairlead

    Harken Reflex Stanchion-Mount Double Cam Fairlead

    $93.95
    : $106.95 (12 %)

    Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Furling leads are offered separately or in complete kits. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling line. Max line: 3/8″ – 10mm For use with 1″/25mm stanchions

    Add to cartDone
  • Harkren reflex stanchion fairlead

    Harken Reflex Stanchion-Mount Fairlead

    $32.95
    : $37.20 (11 %)

    Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Furling leads are offered separately or in complete kits. Two stanchion leads forward guide line outboard to keep sidedecks clear. Max line: 3/8″ – 10mm For use with 1″/25mm stanchions

    Add to cartDone
  • Selden Torsion Cable

    Selden Torsion Cables

    From $265.50
    : $295.00 – $1,828.00 (10 %)

    Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable Thimbles

    Selden Thimbles for Torsion Cables

    From $72.90
    : $81.00 – $107.00 (10 %)

    Selden torsion cable thimbles have an integrated pin, allowing them to securely pin into furler drums & swivels. They are designed to be used with Selden’s torsion cable. Cable Clamps are required in combination with a thimble to properly terminate a torsion cable. Sold as a 2-pack so you have a thimble for each end.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
The Rigging Company
Powered by  GDPR Cookie Compliance (opens in a new tab)
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.