Every part and accessory you need to maintain and enhance your downwind sailing experience.
Remove a filter or try another size combination.
Showing 13–24 of 24 results
The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.
In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…
The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.
To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….
Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…
Harken® recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. Use the 7405 as an inboard lead for two lines, useful for continuous line furlers or cutter rigged boats with two furlers. Sheave dia: 1-9/16″ – 40mm Max line: 3/8″ – 10mm Max working load: 485lb – 220kg For use…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Furling leads are offered separately or in complete kits. A Carbo T2 block with shockcord attaches aft of the double cam to keep line…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Lightweight, UV-stabilized Carbo blocks run exclusively on ball bearings for fast trimming under any load. Two stanchion leads forward guide line outboard to keep sidedecks clear. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling…
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Furling leads are offered separately or in complete kits. A stanchion lead aft features a double Harken Cam-Matic for cleating continuous furling line. Max line: 3/8″ – 10mm For use with 1″/25mm stanchions
Harken recommends equipping asymmetric/code zero furling systems with lead blocks for safe furling from the cockpit. Furling leads are offered separately or in complete kits. Two stanchion leads forward guide line outboard to keep sidedecks clear. Max line: 3/8″ – 10mm For use with 1″/25mm stanchions
Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.
Selden torsion cable thimbles have an integrated pin, allowing them to securely pin into furler drums & swivels. They are designed to be used with Selden’s torsion cable. Cable Clamps are required in combination with a thimble to properly terminate a torsion cable. Sold as a 2-pack so you have a thimble for each end.
Selden Double Stanchion Fairlead
1 × $125.24
C. Sherman Johnson Splice Lifeline Fittings - Turnbuckle - Closed Body
2 × $60.30 
C. Sherman Johnson Splice Line Fittings - Button Stop
1 × $29.70 
C. Sherman Johnson Splice Lifeline Fittings - Turnbuckle - Open Body
1 × $91.80 C. Sherman Johnson Splice Line Fittings – Button Stop for 1-1/4” Stanchion
1 × $42.45 
Harken 38mm Eyestrap - Low Profile
1 × $4.00Subtotal: $413.79
|
Uploaded
Failed
|
 |