Selden

filter products

Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Line Diameter -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Product Size

  • 1 Extra Large
  • 1 Large
  • 1 Medium
  • 1 Small

Showing 13–24 of 30 results

  • Selden double stanchion fairlead

    Selden Double Stanchion Fairlead

    $125.24
    : $121.00

    The Selden double stanchion fairlead for continuous furling lines are designed to slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.

    Add to cartDone
  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    From $187.20
    : $208.00 – $515.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    From $154.80
    : $172.00 – $388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Anti-Twist shackle

    Selden Anti-Twist shackle

    From $45.90
    : $51.00 – $105.00 (10 %)

    The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Bracket for masthead rigs(Selden ONLY)

    Bracket for masthead rigs(Selden ONLY)

    $438.30
    : $487.00 (10 %)

    To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….

    Add to cartDone
  • Selden CX for Code 0 & top-down furling of an asymmetric spinnaker/gennaker

    Selden CX for Code 0 & top-down furling of an asymmetric spinnaker/gennaker

    From $1,122.30
    : $1,247.00 – $5,054.00 (10 %)

    This is an all-in-one solution for the sailor using both Code 0 and gennaker and prefers using one Furling system for both applications. This is the Rigging Company’s preferred system from Selden for top down furling.  The drum and furling line can be permanently mounted to the bow and along the stanchions, or the furling…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden CX Drum

    SELDEN CX Code 0 Furlers

    From $879.30
    : $977.00 – $4,490.00 (10 %)

    SELDEN CX 10 Code 0 Furler

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Bowsprit Brackets Proudly Sold By The Rigging Company

    Bow Brackets for Selden Bowsprit Kits

    From $143.10
    : $159.00 – $219.00 (10 %)

    Use these bow brackets along with a Selden Bowsprit kit to mount a Selden bowsprit on your vessel. All brackets are stainless steel with a PA inner lining. Several configurations of bracket are available based on the geometry of your foredeck & bow area. Frequently a riser fabricated from G10 or Star-board is required for…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Sprit Kit

    Selden Gennaker Bowsprit Kit

    From $812.70
    : $903.00 – $2,357.00 (10 %)

    The Selden gennaker bowsprit kit is an excellent option to retrofit just about any cruising vessel for easier & more efficient use of gennakers and other off-the-wind asymmetric sails. Selden bowsprit kits give gennakers more clear air by moving the tack forward, facilitate simpler & faster maneuvers, are always ready for quick extension, and improve…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 104 Foresail Furler For Boats 20′ to 27′

    From $1,648.00
    : $1,648.00 – $2,516.00

    Selden FURLEX S The S-series is Selden’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable

    Selden Torsion Cables

    From $265.50
    : $295.00 – $1,828.00 (10 %)

    Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 204 Foresail Furler For Boats 28′ to 35′

    From $2,682.90
    : $2,981.00 – $4,184.00 (10 %)

    Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
The Rigging Company
Powered by  GDPR Cookie Compliance (opens in a new tab)
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.