Showing 13–24 of 30 results
The Selden double stanchion fairlead for continuous furling lines are designed to slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.
The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.
In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…
The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.
To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….
This is an all-in-one solution for the sailor using both Code 0 and gennaker and prefers using one Furling system for both applications. This is the Rigging Company’s preferred system from Selden for top down furling. The drum and furling line can be permanently mounted to the bow and along the stanchions, or the furling…
SELDEN CX 10 Code 0 Furler
Use these bow brackets along with a Selden Bowsprit kit to mount a Selden bowsprit on your vessel. All brackets are stainless steel with a PA inner lining. Several configurations of bracket are available based on the geometry of your foredeck & bow area. Frequently a riser fabricated from G10 or Star-board is required for…
The Selden gennaker bowsprit kit is an excellent option to retrofit just about any cruising vessel for easier & more efficient use of gennakers and other off-the-wind asymmetric sails. Selden bowsprit kits give gennakers more clear air by moving the tack forward, facilitate simpler & faster maneuvers, are always ready for quick extension, and improve…
Selden FURLEX S The S-series is Selden’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…
Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.
Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…
No products in the cart.
|
Uploaded
Failed
|
 |