Showing 229–240 of 279 results
Halyard restrainers prevent the halyard from wrapping around the foil on boats where the swivel isn’t mounted near the masthead. Small: For lines up to 3/8″ – 10mm Fasteners: 2x #10 RH in – 5 RH mm For furling unit: 0, 1, 1.5 Large: For lines up to 5/8″ – 16mm Fasteners: 4x #10 RH…
Schaefer offers several ways to bring your halyards and control lines back to the cockpit. Our Halyard lead blocks feature our M-Series design with aluminum sheaves for a strong yet light lead. Fixed and hinged lead blocks feature delrin ball bearing sheaves with stainless steel cheeks for a strong yet smooth lead. Half-Moon mast base…
Schaefer offers several ways to bring your halyards and control lines back to the cockpit. Our Halyard lead blocks feature our M-Series design with aluminum sheaves for a strong yet light lead. Fixed and hinged lead blocks feature delrin ball bearing sheaves with stainless steel cheeks for a strong yet smooth lead. Half-Moon mast base…
Schaefer offers several ways to bring your halyards and control lines back to the cockpit. Our Halyard lead blocks feature our M-Series design with aluminum sheaves for a strong yet light lead. Fixed and hinged lead blocks feature delrin ball bearing sheaves with stainless steel cheeks for a strong yet smooth lead. Half-Moon mast base…
Schaefer offers several ways to bring your halyards and control lines back to the cockpit. Our Halyard lead blocks feature our M-Series design with aluminum sheaves for a strong yet light lead. Fixed and hinged lead blocks feature delrin ball bearing sheaves with stainless steel cheeks for a strong yet smooth lead. Half-Moon mast base…
Schaefer long link toggles replace the standard-length toggle provided with Schaefer headsail furlers. If an anchor roller & anchor are mounted such that the anchor & chain pass under the furling drum, a long link toggle should be used to raise the installed drum height off the deck to account for proper anchor clearance. Additional…
Schaefer Marine Double jaw toggles are used with the same pin sizes as marine eyes and mechanical end fittings on 1 x 19 stainless wire. These high quality stainless toggles permit proper “universal” motion in rigging applications to help reduce wire, rod and end fitting fatigue. Extra deep slot allows use in split masthead sheave…
Made of 316 Stainless steel, these high fatigue fittings are designed for use with corresponding pin sizes of swage or mechanical type marine eyes commonly used on 1 x 19 stainless wire. Extra deep strap designed to allow end to end assembly to Double jaw toggles.
10″ SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 3/4″ (19mm), Length 10″ (254mm), Height 2.5″ (63mm), Fastener size 3/8″ FH, Fastener center/center 2.5″ (63mm), Weight 2.3 lb (1.04kg)
3″ SS Open Base Cleat. Includes urethane washers for isolation when attaching to spars. Maximum line size 1/4″ (6mm), Length 3″ (76mm), Height .6″ (15mm), Fastener size #8 FH, Fastener center/center .78″ (20mm), Weight 1.3oz (.04kg)
Length 10″(254 mm), Line Score 7/8″ (22 mm), Fasteners (4), 3/8″, C/C Long 2-1/2 (63 mm), CC Across 2-1/2″ (63 mm), Weight 1 lb. 5 oz. (595 g)”
Length 10″(254 mm), Line Score 7/8″ (22 mm), Fasteners (4), 3/8″, C/C Long 2-1/2 (63 mm), CC Across 2-1/2″ (63 mm), Weight 1 lb. 5 oz. (595 g)”
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Silver - Triple
1 × $800.84 
XCS Clutch with Ceramic Cam and Base,6-10mm Line, White - Double
1 × $556.00 
Schaefer 8 Series-2 3/8" Single - UC Sheave
1 × $417.78
LEWMAR WINCH HANDLE TURN KIT GREY
1 × $50.36 
Schaefer 8 Series-2 3/8" Single Screw-in Swivel
1 × $417.42
Schaefer 1 Series-3/4" Single Lashing Eye
1 × $26.23Schaefer Marine Cleat, 4 Hole Deck, 10"(254mm), Black
1 × $143.69Schaefer Marine Cleat, 3", S.S., Open Base
1 × $50.58Subtotal: $2,462.90