Showing 1–12 of 18 results
Keep the sun off your face and look good doing it wearing a Rigging Company hat! One size fits all Comes in grey or charcoal
Be seen in our Rigging Company T-shirt when you’re out on the water. Made of a 50/50 poly cotton blend, available in Small, Medium, Large, Xtra Large and XX Large. The Rigging Company has partnered up to with BSI Denmark rod rigging products and services to provide the Mid-Atlantic with superior rod rigging products, installation…
To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….
Emergency Spare Stay Kit Modern high-strength synthetic rigging makes it possible to carry a dependable emergency stay without storing heavy coils of spare wire onboard. Our Emergency Spare Stay Kit provides a compact, adaptable solution designed to get you safely underway again after rigging damage offshore. Each kit uses New England Ropes V12 single-braid Vectran…
The boom preventer is a traditional & highly effective system that can, if rigged properly, leave your deck clutter free. The preventer, unlike the boom brake, is to be rigged to the very outboard end of the boom via a pad eye and pendant. Many “new and improved” preventer systems exist in plan form and…
TRC Lazy Jacks for sailboats up to 40′ – Complete DIY Mainsail Handling System Our in-house Lazy Jack kits provide a clean, reliable solution for sailors installing a system from scratch or upgrading an existing setup. Designed and refined through decades of professional rigging experience, this system helps guide and contain the mainsail as it…
Whisker poles, while quite useful, can be a challenge to work with and store when not in use. Our on-the-mast pole systems allow the pole to be worked with easily from the mast, and allow for the pole to be stored vertically on the mast when not in use. The outboard (jaw) end of the…
USA Manufactured to our specific design standards, the TRC Bosun’s chair provides a comfortable, safe seat that lets you work aloft with confidence. Â Constructed of nylon webbing and sunbrella canvas with cushioned plywood seat and 316 grade 5/16″ (8mm) stainless steel welded rings.
The Rigging Company Removable Inner Forestay Stowage Clip allows you to Furl away the headsail to make the bow a safe and stress free place to work. Click here for Notes, Tips and Tricks on how to use it.
Our standard rigging tape is 7mm Plasticized PVC film coated with a rubber-based adhesive. Highly conformable with excellent resistance to moisture, weather conditions (including sunlight), and most chemicals. Used for securing spreader boots/mast boot, turnbuckle clevis pins, etc. Each roll is 3/4″ wide by 66′ long.
Type 316 Stainless Steel KOS (Korean) Wire in a 1×19 strand configuration. 1×19 wire is durable with low stretch and is suitable for standing rigging applications, with either swage or mechanical fittings to terminate it. Other sizes available upon request.
Type 316 Stainless Steel KOS (Korean) Wire in a 1×19 strand configuration. 1×19 wire is durable with low stretch and is suitable for standing rigging applications, with either swage or mechanical fittings to terminate it. Other sizes available upon request.
C. Sherman Johnson Eye to Eye Fitting
1 × $63.22
C. Sherman Johnson Splice Lifeline Fittings - Deck Terminal
1 × $24.50Bosuns Chair-The Rigging Company
1 × $399.99Subtotal: $487.71