Showing 1–16 of 94 results
Also known as a Gibb Plug. Use the “T” Terminal backing plate rubber plugs with “T” Terminals. Rubber plug sizes correspond to the terminal wire sizes on the backing plates.
High Quality Swiss Made Felco Cable Cutters
Handy Crimp hardware is for use in low-load applications only. When properly installed, these fittings develop approximately 70% of the strength of 7×7 cable matching the size of the fitting. For high load applications, professional machine swaging is recommended. The crimping process of this hardware is labor intensive and leaves three distinct crimp marks on…
Hayn gate eyes are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. All threads are left-hand threaded.
Hayn gate eyes are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire.
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin regardless of wire size. A- Jaw Depth: 1″ E- Jaw Gap: 5/16″
Hayn lifeline adjusters are made from 316 Stainless Steel. All adjusters have a 1/4″ clevis pin and 1/4-28 RH threads regardless of wire size. O- Open Length: 7-3/8″ C- Closed Length: 5-1/4″ A- Jaw Depth: 1-5/16″ E- Jaw Gap: 5/16″
Hayn lifeline toggle jaws are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A deck toggle can be used wherever a cable needs to be terminated to a deck or bulkhead. 1/4″ wire fitting uses 7/32″ swage die. Pin diameter…
Machined from T316 Stainless Steel, Hayn Marine swage studs are polished to a mirror finish. Custom configurations available upon request.
Machined from T316 Stainless Steel, Hayn Marine swage studs are polished to a mirror finish. Custom configurations available upon request.
Hayn lifeline termination studs or “buttons” are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire.
Hayn gate eyes are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. All threads are left-hand threaded.
Hayn lifeline toggle jaws are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. Generally used at the stern rail when no gate is required with a turnbuckle forward. 1/4″ wire fitting uses 7/32″ swage die.
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A deck toggle can be used wherever a cable needs to be terminated to a deck or bulkhead. 1/4″ wire fitting uses 7/32″ swage die. Pin diameter refers…
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A check nut locks the turnbuckle in place. 1/4″ wire fitting uses 7/32″ swage die.
Hayn lifeline turnbuckles are T316 Stainless Steel and are polished to a mirror finish. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A check nut locks the turnbuckle in place. 1/4″ wire fitting uses 7/32″ swage die.
No products in the cart.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
