Showing 1–12 of 17 results
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 27mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead…
Schaefer 7 Series-2 3/8" Fiddle - Aluminum, Ball Bearing
1 × $232.16Harken Endstops - 27mm Low-Beam "ESP Style" for Boatbuilders
1 × $16.95
C. Sherman Johnson Splice Lifeline Fittings - Over Center Gate Hook - Mini
1 × $66.38 Harken In-Mast Furling Outhaul Car - 32mm Hi-Load
1 × $1,612.95
XTR Clutch, Lines 8-12mm - Black
1 × $156.75 Harken In-Mast Furling Outhaul Car - 27mm
1 × $497.95Subtotal: $2,583.13