Showing 1–12 of 17 results
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 27mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead…
LEWMAR SYNCHRO CRUISING BLOCKS: 60MM SYNC BLOCK FIDDLE CAM
1 × $130.00
XCS Clutch with Ceramic Cam and Base, 8-14mm Line, Silver - Side Mount Port
1 × $387.27 Harken High-Beam Endstops - 32mm Heavy-Duty
1 × $74.95Subtotal: $592.22