Showing 49–60 of 116 results
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 2-3/4″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-7/32″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-3/8″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Designed for cockpit-mounted cruising installations and similar setups, traveler cars with Carbo-Cams allow traveler control cleating at the car instead of the track ends. On-car cleating paired with single-sheave end controls leave room for you to open the lazarette. They also increase purchase from 2:1 to 3:1 compared to systems trimmed from single-sheave end controls….
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 3-1/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-3/8″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′ Toggle pin dia: 5/16″
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 4-1/4″ Width: 2-3/4″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum…
Harken Traveler Car - 22mm Hi-Load w/Fixed Sheaves & Eyestrap
1 × $284.95
Harken Standard Cam Cleat Adapter Plate
1 × $17.95
Harken 57 mm Carbo 5-Sheave Block - Swivel
1 × $233.95
Harken 57 mm Carbo Fiddle Block - Swivel
1 × $65.95
Harken 57 mm Carbo Block - Swivel Becket
1 × $61.95
Harken Standard Cam-Matic 150 Cam Cleat - Double Springs
1 × $37.83
Harken 57 mm Carbo Block - Swivel, Becket, Cam Cleat
1 × $161.95
Harken 57 mm Carbo Fiddle Block - Swivel, Becket
1 × $72.95
Harken Standard Carbo Cam Cleat
1 × $34.95
Harken Low-Beam Endstops - 27mm Heavy-Duty
1 × $38.95
Harken 57 mm Carbo Cheek Ratchet Block
1 × $91.95
Harken 57 mm Carbo Fiddle Block - Swivel, Becket, Cam Cleat
1 × $175.95
Harken Standard Cam-Matic 150 Cam Cleat
1 × $44.95
Harken 57 mm Carbo Block - Swivel
1 × $54.95
Harken Standard Extreme Angle Fairlead
1 × $23.95
Harken Standard 15-degree Angled Riser
1 × $14.95
Harken Standard Double Cam Cleat
1 × $123.95
Harken 38mm Standard Eyestrap
1 × $3.06
Harken 57 mm Carbo Fiddle Block - Swivel, Cam Cleat
1 × $169.95Subtotal: $1,715.04
|
Uploaded
Failed
|
 |