Showing 13–24 of 116 results
These 22 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track. Length: 3-7/16″ Width: 1-5/16″ Max working load: 1100lbs Use with 22mm Low-Beam Pinstop Track
Harken Micro CB traveler cars are used on small dinghies and catamarans. Ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Track comes in low- and high-beam configurations and is predrilled with holes for mounting…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. The 382 Radial Traveler car has a curved ball race to fit curved track-perfect for radial vangs on boats like the Star. For horizontal curved track only – 600-800 mm (24″ – 31.5″) radius. This car cannot be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 6-3/4″ Width: 3-1/8″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 1250lbs Breaking load: 2500lbs Minimum curved track radius: 6.67′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 4-1/8″ Width: 2-1/4″ Car body height: 15/16″ Max working load: 1250lbs Breaking load: 2500lbs Minimum curved track radius: 6.67′ Top pin dia:…
Harken 51mm Trigger Cleat Eyestrap
1 × $11.95
Harken 2.25" Hexa-Cat Base Block - Swivel, Cam Cleat
1 × $260.95
Schaefer Clear Step Lead Block For 1-1/4" Stanchions
1 × $202.19
Schaefer 5 Series Organizer Triple - Stainless
1 × $201.33
Harken Two-Speed Mainsheet System 3:1, 6:1
1 × $851.95
Schaefer Clear Step Lead Block for 1" Stanchions
1 × $83.30
Harken Two-Speed Mainsheet Self-Contained System 4:1/8:1
1 × $880.95
Harken 22 mm Fiddle Block - V-Jam, Becket
1 × $46.95
Schaefer 5 Series Organizer Triple - Aluminum
1 × $193.82
Schaefer 5 Series Organizer 2 Over 2 - Aluminum
1 × $250.07Subtotal: $2,983.44