Showing 97–108 of 257 results
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Additional lengths can be spliced together using the Harken 32mm track splice link. Mounting holes use 3-15/16″ spacing. Track has three pinstop holes between each mounting hole instead of the usual one hole per mounting hole. Track length is 1 meter….
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead of the usual one hole…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #8 Flat-head screws. Additional lengths can be spliced together using the Harken 13mm track splice link. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully supported along its entire length….
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws, with pre-drilled holes spaced 3-15/16″ apart. Additional lengths can be spliced together using the Harken 22mm track splice link. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Harken Low-Beam tracks are designed to be mounted directly to…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 1/4″ flat-head screws, with pre-drilled holes spaced 3-15/16″ apart. Additional lengths can be spliced together using the Harken 27mm track splice link. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 32mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Harken Low-Beam tracks are designed to be mounted directly to…
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 22mm Low-Beam Pinstop Track. Length: 1-5/8″ Width: 1-3/8″ Height above track: 13/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 27mm Low-Beam Pinstop Track. Length: 2-5/16″ Width: 1-15/16″ Height above track: 1-5/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 22mm Low-Beam Pinstop Track. Length: 3-1/2″ Width: 1-15/16″ Height: 2-3/8″ Max Working Load: 1984lbs Breaking Load: 3968lbs
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. Use with Harken 32mm Low-Beam Pinstop Track. Length: 2-9/16″ Width: 2-1/4″ Height above track: 1-5/16″
Harken pinstop end controls secure your traveler car on the track and are adjustable, allowing the range of the traveler to be adjusted on the fly. This pinstop plunger is threaded so the adjuster pin can be threaded closed to secure the stop in place. Use with Harken 32mm Low-Beam Pinstop Track. Length: 2-1/2″ Width:…
LEWMAR SYNCHRO CRUISING BLOCKS: 60MM SYNC BLOCK FIDDLE BKT BK
1 × $70.16
Double XCS0610 Stainless Steel Sides
1 × $785.96 
Schaefer 12 Series-4" Single Becket, UC
1 × $1,197.41
XCS Grand Prix Clutch with Ceramic Cam and Base, 6-10mm Line, White - Single
1 × $485.99 Harken Pinstop End Control - 22mm
1 × $131.95Subtotal: $2,671.47
|
Uploaded
Failed
|
 |