Showing 85–96 of 257 results
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
Use Harken furling outhaul cars with in-mast or behind-the-mast furlers on boats up to 45′. Sheave carriers pivot side-to-side to accommodate changing lead angles. Systems have 2:1 purchase and ride on cars with Torlon ball bearings. A dead-end outhaul shackle is included. Cars have axle-bearing sheaves. See our DIY kit section for a complete package…
These 22 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm low-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Additional lengths can be spliced together using the Harken 27mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. This track replicates the mounting hole spacing (4″) of older legacy Harken products. Track has two pinstop holes between each mounting hole instead…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 3/8″ Flat-head screws. Additional lengths can be spliced together using the Harken 32mm track splice link. Mounting hole spacing is 3-15/16″. Harken Low-Beam tracks are designed to be mounted directly to a deck or spar and to be fully…
Harken Traveler Car - 13mm w/Control Blocks
1 × $191.95
Harken Traveler Car - 22mm Hi-Load w/Stand-up Toggle
1 × $288.95Harken Line-Shedding Endstops - 22mm Low-Beam
1 × $13.95
Schaefer 1 Series-3/4" Single Lashing Eye with Becket
1 × $39.78
XCS Clutch,6-10mm Line, Black - Triple
2 × $640.89 
Harken Traveler Car - 22mm Non-Captive-Bearing w/Pivoting Shackle
1 × $211.95
Schaefer 10 Series-3 1/4" Fiddle, UC Sheave
1 × $1,600.20
Harken Traveler Car - 32mm Windward Sheeting
1 × $1,176.95
Harken Traveler Car - 22mm Low Load w/Pivoting Shackle & Control Tangs
1 × $200.95
Harken Traveler Car - 22mm w/Fixed Sheaves & Eyestrap
1 × $234.95
Harken Traveler Car - 22mm w/Pivoting Shackle
1 × $205.95
XCS Clutch,6-10mm Line,White - Triple
1 × $640.89 XCS Clutch with Ceramic Cam and Base,6-10mm Line, White - Triple
1 × $800.84 
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Silver - Triple
1 × $800.84 
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Black - Side Mount Port
1 × $387.27 
Harken Track Splice link - 22mm
1 × $12.95
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Black - Single
1 × $336.92 XCS Grand Prix Clutch with Ceramic Cam and Base, 6-10mm Line, Black - Single
2 × $485.99 
Single XCS0610 Stainless Steel Sides
1 × $601.61 
Lewmar EVO manual self tailing winch - 45, Alloy Grey
1 × $2,703.56
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Silver - Side Mount Port
1 × $387.27 
LEWMAR SYNCHRO CRUISING BLOCKS: 60MM SYNC BLOCK DOUBLE BKT BK
1 × $93.56
Harken Traveler Car - 32mm w/Pivoting Shackle & 4:1 Controls
1 × $411.95XCS Clutch,6-10mm Line,Silver - Triple
1 × $640.89 Harken In-Mast Furling Outhaul Car - 32mm Hi-Load
1 × $1,612.95Subtotal: $15,850.84
|
Uploaded
Failed
|
 |