Showing 145–156 of 257 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 5-3/16″ Width: 2-3/4″ Car body height: 2″ Max working load: 2300lbs Breaking load:…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 2-3/4″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-7/32″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-3/8″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
XCS Clutch with Ceramic Cam and Base,6-10mm Line, White - Single
1 × $336.92 
Schaefer 2 Series-1 1/16" Single w/Front Side Shackle
1 × $80.01
XCS Clutch,6-10mm Line,Silver - Triple
2 × $640.89 
Double XCS0610 Stainless Steel Sides
2 × $785.96 
Harken Traveler Car - 22mm w/Fixed Sheaves & Eyestrap
1 × $234.95
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Silver - Side Mount Port
2 × $387.27 
Harken Traveler Car - 22mm w/Pivoting Shackle & Control Tangs
1 × $232.95
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Black - Double
1 × $556.00 
Harken Traveler Car - 22mm Low-Load w/Loop for Soft Attachments
2 × $159.95
LABEL FUNCTION SHEET CLUTCHES
2 × $13.46XCS Clutch with Ceramic Cam and Base,6-10mm Line, Black - Single
2 × $336.92 
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Silver - Single
1 × $336.92 
Harken Traveler Car - 13mm w/Pivoting Shackle
1 × $147.95XCS Clutch with Ceramic Cam and Base,6-10mm Line, White - Double
1 × $556.00 Harken Traveler Car - 22mm Low Load w/Pivoting Shackle & Control Tangs
1 × $200.95
Harken Traveler Car - 13mm w/Athwartships Loop for Soft Attachments
1 × $142.95XCS Clutch with Ceramic Cam and Base,6-10mm Line, White - Triple
2 × $800.84 
Harken Traveler Car - 22mm Low Load Non-Captive-Bearing w/Pivoting Shackle
1 × $178.95
Schaefer 2 Series-1 1/16" Double w/Front Side Shackle
1 × $120.02
XCS Clutch,6-10mm Line, Black - Side Mount Port
2 × $333.95 XCS Clutch,6-10mm Line,White - Double
1 × $449.36 
Triple XCS0610 Stainless Steel Sides
2 × $982.21 XCS Grand Prix Clutch with Ceramic Cam and Base, 6-10mm Line, White - Single
1 × $485.99 XCS Grand Prix Clutch with Ceramic Cam and Base, 6-10mm Line, Black - Single
1 × $485.99 
Harken Winches WINCH-2 SPD RADIAL SELF-TAIL ALUM
1 × $4,386.85
XCS Clutch with Ceramic Cam and Base,6-10mm Line, Black - Triple
1 × $800.84 XCS Clutch,6-10mm Line,Silver - Single
1 × $283.62 Harken Traveler Car - 27mm w/Pivoting Shackle
1 × $232.95
Schaefer 10 Series-3 1/4" Stand-Up Swivel, UC
1 × $882.00
Harken Track Splice link - 13mm
1 × $5.95Harken Traveler Car - 27mm Hi-Load w/Athwartships Loop for Soft Attachments
1 × $400.95Subtotal: $20,421.97
|
Uploaded
Failed
|
 |