Remove a filter or try another size combination.
Showing 25–36 of 103 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Max working load: 850lbs
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 5-3/16″ Width: 2-3/4″ Car body height: 2″ Max working load: 2300lbs Breaking load:…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 2-3/4″ Height: 2″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′
Harken 2.25" Double Block
1 × $130.60
Harken Stanchion-Mount Lead Block Kit
1 × $351.95
Harken Winches Radial 3 Spd Electric ST Alum Winch Horizontal Left Mount 12 Volt
1 × $11,432.00
Harken Winches Radial 2 Spd Electric ST Chrome Winch Horizontal Left Mount 24 Volt
1 × $5,330.00Harken Winches Radial 3 Spd Electric ST Chrome Winch Horizontal Left Mount 24 Volt
2 × $11,999.00Harken Winches Radial 2 Spd Electric ST Alum Winch Horizontal Left Mount 24 Volt
1 × $10,267.00Subtotal: $51,509.55
|
Uploaded
Failed
|
 |