Showing 1–12 of 50 results
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon? rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 7-1/2″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 7500lbs…
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon? rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 5″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 5000lbs…
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with 5/16″ Flat-head screws. Mounting hole spacing is 2-15/16″.
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 27mm high-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.
Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Fastens with #10 Flat-head screws. Additional lengths can be spliced together using the Harken 22mm track splice link. Track mounting holes are drilled with Harken’s legacy 4″ spacing to match older tracks. Harken Low-Beam tracks are designed to be mounted directly…
Harken End Control - 32mm ESP
1 × $338.95
Harken End Control - 27mm ESP
1 × $254.95Harken High-Beam Endstops - 13mm w/Dead-End
1 × $12.95Harken High-Beam Endstops - 32mm Heavy-Duty
1 × $74.95Subtotal: $681.80
|
Uploaded
Failed
|
 |