Product Vendor -
Product Unit Type -
Product Sheave Size -
Product Block Type -
Product Line Type -
Product Line Diameter -
Product Color -
Product Hydraulic Adjuster Type -
Product Wire Rigging Type -
Product Standing Rigging Part -
Product Lifeline Fitting Style -
Product Lifeline Fitting Type -
Product Wire Size -
Product Pin Diameter -
Product Furler Type Sub Category -
Product Adjuster Length -
Product Poles-Sprits Materials -
Product Traveler Part -
Product Traveler Type -
Product Track Size -
Showing 1–12 of 16 results
-
-
Selden Furling Accessories (12)
-
Selden Adjustable Tack Swivel (ATS)
Price range: $314.00 through $564.00:$314.00 – $564.00This accessory for Selden GX furlers enables the sailor to easily trim the luff of the gennaker. The Adjustable Tack Swivel slides up and down over the AT-cable and is handled from the cockpit with a down haul. As opposed to trimming the luff by slacking the halyard, the AT-cable can now be permanently tensioned…
Select options This product has multiple variants. The options may be chosen on the product page -
Colligo Tosion Cable Clamps
Price range: $80.10 through $125.10:$89.00 – $139.00(10 %)Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Continuous Furling Line
Price range: $42.30 through $484.20:$47.00 – $538.00(6 – 50 %)Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Low friction shackle
Price range: $56.70 through $215.10:$63.00 – $239.00(10 %)This snap shackle has a big, well rounded loop allowing the rope to slide with low friction and it can be used to tension a Selden CX with 2:1 purchase. This not only makes for better performance but it also makes it easier to connect the Selden CX to a bowsprit, from the foredeck. The…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Twin Cam Block for Continuous Furling Lines
Price range: $147.60 through $203.40:$164.00 – $226.00(10 %)TECHNICAL FEATURES PBB 50 • Polymer sheave. • Stainless steel strap for strength and long service life. • Torsional rigid cheeks in glass fibre reinforced polymer to prevent jamming. • Sliding swivel locking mechanism.
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Double Stanchion Fairlead
$108.90:$121.00(10 %)The Selden double stanchion fairlead for continuous furling lines are designed to slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.
-
Selden Dead-end Fitting
Price range: $187.20 through $463.50:$208.00 – $515.00(10 %)The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.
Select options This product has multiple variants. The options may be chosen on the product page -
2:1 Halyard Head Shackle
Price range: $154.80 through $349.20:$172.00 – $388.00(10 %)In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Anti-Twist shackle
Price range: $45.90 through $94.50:$51.00 – $105.00(10 %)The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.
Select options This product has multiple variants. The options may be chosen on the product page -
Bracket for masthead rigs(Selden ONLY)
$438.30:$487.00(10 %)To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….
-
Selden Furlex 104 Foresail Furler For Boats 20′ to 27′
Price range: $1,648.00 through $2,516.00:$1,648.00 – $2,516.00Selden FURLEX S The S-series is Selden’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…
Select options This product has multiple variants. The options may be chosen on the product page -
Selden Torsion Cables
Price range: $265.50 through $1,645.20:$295.00 – $1,828.00(10 %)Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.
Select options This product has multiple variants. The options may be chosen on the product page
TRC COMPLETE Facnor FX+ 4500 Code 0 Furler Package For Boats 42'-55'