Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

  • Show more

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Showing 1–16 of 32 results

  • Colligo Terminator Thimbles for Colligo Furler products. Proudly sold by The Rigging Company

    Colligo Furler Terminator Fittings

    $107.00$224.00
    : $119.00$249.00 (10 %)

    These Terminator fittings are made specifically to work with Colligo furling gear (see below). They allow use with Colligo Torque Rope clamps and pin directly to the furling gear itself. CSS75BLK Furler Line terminator, up to 11 mm torque line, Up to 1/2″ pin CSS75A Furler Line terminator, up to 15 mm torque line, Up…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo torque Rope Receivers proudly sold by The Rigging Company

    Colligo Torque Rope Receivers

    $129.99$199.99

    For use with torque rope line for Code 0 and Spinnaker furling gear. One end fitting now replaces the thimble and clamp that was need for a proper termination before. Colligo Torque rope receivers are easy to install and can be removed and reinstalled to get the line length correct.  Not that any of us have…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Facnor Furler Products Proudly Sold by The Rigging Company

    FACNOR FX+ FAST TOP-DOWN SWIVELS

    $501.66$2,039.50

    Easy furling of your asymmetric Spinnaker adapt your FX+ Gennaker/Code sail furler to the use for asymmetric Spinnaker Top Down furling, i.e. from top to bottom (free luff) Free rotating tack fitting No maintenance (mechanism is highly protected) Same features as FX+ mechanisms : tested and strong quick release attachments

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Facnor Code furlers proudly sold by the Rigging Company

    FACNOR FX+ RATCHET MECHANISMS

    $137.88$216.00

    Patentened “Start & Go” function Enables to make a break when furling and start furling in again Works clockwise & anti-clockwise

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Facnor Code furlers proudly sold by the Rigging Company

    FACNOR FX+ THIMBLES

    $43.75$250.00

    Optimum transmission of rotation Thimble perfectly fitting your FX+ furler For anti-torsion rope Miror polished stainless steel Using thimbles specifically designed for a flying sail furler enables to prevent from the wear of the mechanism jaw and pin and to optimize the transmission of rotation from the mechnanism into the anti-torsion rope.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Facnor Furler Products Proudly Sold by The Rigging Company

    FACNOR FX+ SSH+ SOLID SHEAVES

    $89.19$263.52

    Smooth & quickly installed quick and safe fitting fo your FX+ furler installation as 3-to-1 or 2-to-1 enables tightening from below the drum possible fitting in case of bowsprit

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Torque Rope (Anti-tortion cable) proudly sold by The Rigging Company

    Colligo Torque Rope (Anti-Torsion line)

    $4.40$18.00 foot
    : $4.86$19.90 (9 – 10 %)

    Colligo Torque ropes are for  luff lines for code zero style sails and torque lines for top down furled spinnakers.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden torsion cable clamp

    Colligo Tosion Cable Clamps

    $80.10$125.10
    : $89.00$139.00 (10 %)

    Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden continuous furling line

    Selden Continuous Furling Line

    $37.80$440.10
    : $42.00$489.00 (10 %)

    Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden Low friction shackle

    $56.70$215.10
    : $63.00$239.00 (10 %)

    This snap shackel has a big, well rounded loop allowing the rope to slide with low friction and it can be used to tension a Seldén CX with 2:1 purchase. This not only makes for better performance but it also makes it easier to connect the Seldén CX to a bowsprit, from the foredeck. The…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden twin cam block

    Selden Twin Cam Block for Continuous Furling Lines

    $143.10$197.10
    : $159.00$219.00 (10 %)
    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden double stanchion fairlead

    Selden Double Stanchion Fairlead

    $105.30
    : $117.00 (10 %)

    The Selden double stanchion fairlead for continuous furling lines slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.

  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    $170.10$421.20
    : $189.00$468.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    $154.80$349.20
    : $172.00$388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Bracket for masthead rigs(Selden ONLY)

    $438.30
    : $487.00 (10 %)

    To allow for a Seldén GX system to be fitted to a mast head rig, the halyard must be moved forward to prevent conflict between the halyard swivel and the forestay. A mast head bracket with a smooth halyard lead solves the problem. This bracket is intended for gennakers/asymmetric spinnakers only and not Code 0’s….

  • 29mm outboard stanchion mount block

    Harken 29mm Outboard Stanchion-Mount Block

    $56.61
    : $62.90 (10 %)

    Harken® recommends equipping every system with Carbo lead blocks for safe furling from the cockpit. The 7403 outboard assembly allows furling line to travel outboard of the stanchion to keep the sidedeck clear. Block mounts with a strong four-screw clamp without removing the stanchion or lifelines. Sheave dia: 1-1/8″ – 29mm Max line: 3/8″ –…