Colligo Marine Furlers are unique in that they are all designed with maintenance free bearing systems, but they can all be taken apart and serviced if needed.
Remove a filter or try another size combination.
Showing all 5 results
These Terminator fittings are made specifically to work with Colligo furling gear (see below). They allow use with Colligo Torque Rope clamps and pin directly to the furling gear itself. CSS75BLK Furler Line terminator, up to 11 mm torque line, Up to 1/2″ pin CSS75A Furler Line terminator, up to 15 mm torque line, Up…
Colligo Marine® Furlers are unique in that they are all designed with maintenance free bearing systems, but they can all be taken apart and serviced if needed. From heavy duty automotive style bearings with double seals in Colligo Marine CN5 series to Torlon or Ceramic bearing systems in the head swivels or CF1.5 series furlers….
Industry Standard Spinnaker Furling Made for furling curved luff asymmetrical spinnaker sails. Top Down style spinnaker furlers use a torsionally stiff “Torque Rope” to transmit torque up from the lower drive end of the furler to the head of the sail allowing the sail to be furled from the top down. The tack of the…
Colligo Industry Standard Spinnaker Furling Made for furling curved luff asymmetrical spinnaker sails. Top Down style spinnaker furlers use a torsionally stiff “Torque Rope” to transmit torque up from the lower drive end of the furler to the head of the sail allowing the sail to be furled from the top down. The tack of…
For use with torque rope line for Code 0 and Spinnaker furling gear. One end fitting now replaces the thimble and clamp that was need for a proper termination before. Colligo Torque rope receivers are easy to install and can be removed and reinstalled to get the line length correct. Not that any of us have…
Harken 38mm Standard Eyestrap
1 × $8.95
Harken 38mm Eyestrap - Low Profile
1 × $4.00
Harken 52mm Offshore Eyestrap
1 × $6.75Subtotal: $19.70
|
Uploaded
Failed
|
 |