Opening Pre-Feeder 45-06
$104.90Forged aluminum opening pre-feeder. Works with #5 and #6 luff tapes. Allows quick engagement of your luff tape at anytime.
Showing 17–32 of 71 results
Forged aluminum opening pre-feeder. Works with #5 and #6 luff tapes. Allows quick engagement of your luff tape at anytime.
Fully Machined Opening Pre-Feeder. Adjustable to work with #5-#8 Luff Tapes. Hardcoat anodized finish for durability.
Manufactured from S.S. & Bronze, Max Luff Tape 1/4″-1/2″ Bolt Rope (6 mm-13 mm), L 2-5/16″ (59 mm), Width 2″ (51 mm), Thickness 2″ (51 mm), Weight 4 oz. (113 g). Slide Circumference 3/8″ (10mm) Oversized silicon bronze rollers smooth Tuff Luff’s the sail on it’s way to the feeder, assuring a perfect set and…
Manufactured from S.S. & Bronze, Max Luff Tape 1/4″-1/2″ Bolt Rope (6 mm-13 mm), L 2-5/16″ (59 mm), Width 2″ (51 mm), Thickness 2″ (51 mm), Weight 4 oz. (113 g). Slide Circumference 3/8″ (10mm)
Tuff Luff Wear Tape. 1.5″ (38mm) x 4′ (1.7m). Fits 1205, 1706 and A-1706 Systems. .025″ (.635mm) UHMW Wear Tape Tuff Luff Wear Tape. 3″ (76mm) x 6′ (2.1m). Fits 3007, 4807, 6008 Systems. .025″ (.635mm) UHMW Wear Tape Tuff Luff Wear Tape. 2″ (51mm) x 4′ (1.7m). Fits 2206, A-2506, 3007 Systems. .025″ (.635mm)…
Why a Walder® boom brake ? Jibing remains a delicate and dangerous maneuver for even the most experienced sailor. Down-wind sailing is not always fully appreciated because, on that delicate and unforgiving tack, the helmsman must remain attentive to the boat’s pendulum motion and remain constantly vigilant against accidental jibes and their possible bad consequences : ripped…
3M 4000 UV is a versatile sealant that can be used for a wide variety of bedding, caulking, & sealing tasks. 4000 UV is resistant to weathering, salt water and stresses caused by joint movement. Seals between mechanically fastened joints on wood, fiberglass, metal and most plastics. Applications include sealing deck to hull joints, thru-hull…
One-part, all-purpose sealant chemically reacts with moisture and forms a flexible, watertight, weather-resistant seal on joints and hardware. Can be used above or below the waterline; approximately half the strength of 3M 5200, which allows for eventual disassembly of parts. Tack free in 2 hours, complete cure in 24 hours. Tensile strength 300psi. This formula…
5200 Adhesive/Sealant is a one-part polyurethane compound that creates an extremely high-strength, watertight seal above and below the waterline. Provides exceptionally strong adhesion, yet stays flexible after it cures. Ideal for underwater thru-hull fittings, hull-to-deck joints, portholes and bonding wood to fiberglass. Goes on smoothly, won’t sag, and remains workable for up to 4 hours…
One-part, thiokol-based polysulfide sealant cures to a positive waterproof seal. Resists oil, brine, gas, water and most chemicals. Bonds to wood, fiberglass, metal and glass. No priming required except on oily woods such as teak. Permanently flexible marine sealant, can be sanded and painted, cures to a firm flexible rubber seal. Tack-free in 24 hours,…
The boom preventer is a traditional & highly effective system that can, if rigged properly, leave your deck clutter free. The preventer, unlike the boom brake, is to be rigged to the very outboard end of the boom via a pad eye and pendant. Many “new and improved” preventer systems exist in plan form and…
USA Manufactured to our specific design standards, the TRC Bosun’s chair provides a comfortable, safe seat that lets you work aloft with confidence. Â Constructed of nylon webbing and sunbrella canvas with cushioned plywood seat and 316 grade 5/16″ (8mm) stainless steel welded rings.
The ee range is designed for the pin to pin, or eye to eye (ee) fixings of the super-competitive dayboat classes such as Metre boats, Dragons, Etchells, Sunbeams, and more. The smartlink ee has all the features of the standard smartlink range, yet can be rigged into eye to eye fixtures of standing rigging. With…
Our 10t smartlink has a max working load of 10 tonnes, ideal for a range of uses from control systems such as cunningham and vang, through to jib tack, main sheet and backstays. * Max working load 10,000kg * Sensor dimensions 93 x 74 x 25mm * Sensor weight 360g * Strop diameter 12.4mm
The ee range is designed for the pin to pin, or eye to eye (ee) fixings of the super-competitive dayboat classes such as Metre boats, Dragons, Etchells, Sunbeams, and more. The smartlink ee has all the features of the standard smartlink range, yet can be rigged into eye to eye fixtures of standing rigging. With…
Subtotal: $3,045.00