Showing 1–12 of 15 results
Harken Stainless Steel Eyestraps are great for a wide variety of uses, from mounting blocks to dead-ending or keeping a line in place on deck or on a spar. This eyestrap is designed to mount on top of Harken 150 & 365 Cam Cleats. Note this will not provide enough clearance for larger lines in…
Fits standard Harken cams. Also great as block mounts & lashing points.
Harken Stainless Steel Eyestraps are great for a wide variety of uses, from mounting blocks to dead-ending or keeping a line in place on deck or on a spar. This eyestrap is designed to mount on top of Harken 150 & 365 Cam Cleats.
Fits standard Harken cams. Also great as block mounts & lashing points.
Wedge kits and risers are available to improve the angle of your cams. Underdeck shims are included with angled risers and wedges for easy mounting.
Wire fairleads maintain a low profile while holding the line close to the cleat.
Harken 150 cleats are the standard workhorses of the dinghy & sportboat world. Ball bearing 150 cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics? are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Length: 2-9/16″ Width: 1-1/4″ Height: 1-3/16″ Weight: 2.5oz Min line dia: 1/8″-3mm Max line dia: 1/2″-12mm Fasteners:…
Harken 150 cleats are the standard workhorses of the dinghy & sportboat world. Ball bearing 150 cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics® are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. This cleat has two metal springs instead of one for a firmer action & grip. Length: 2-9/16″…
Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Lightweight fiber-reinforced Carbo-Cams? for racing where weight is critical, or where adjustments are less frequent. Add a Harken riser, eyestrap or fairlead to increase functionality. Length: 2-9/16″ Width: 1-1/4″ Height: 1-3/16″ Weight: 1.4oz Min line dia: 1/8″-3mm Max line dia:…
Harken? ball bearing cam cleats hold lines securely and release instantly for easy, precise trimming. Aluminum Cam-Matics? are hardcoat-anodized for high-load, high-wear, continuous adjustment applications. Length: 3-17/32″ Width: 1-1/4″ Height: 2-1/16″ Weight: 4.5oz Min line dia: 5/16″-8mm Max line dia: 3/8″-10mm Fasteners: #10 FH Fastener spacing: 2-7/16″ Max working load: 500lbs Breaking load: 750lbs
The X-Treme Angle Fairlead allows releasing and recleating at angles up to 90? to the cleat. This sets it apart from other fairleads where line uncleats at extreme angles and can?t recleat without centering the line.
Lightweight, fiber-reinforced flairleads feature stainless wearguards for long life and are available in various colors for color-coding your cams.
Waterline Design WLD1150 Leather protection for lifeline – wire
1 × $15.16 
Waterline Design WLD1050 Spreader boot in leather - small (2-pack)
1 × $54.25
Waterline Design WLD1155 Leather protection for stanchion pole
1 × $15.16 
Cyclops Marine BG03 Gateway
1 × $419.00
Cyclops Marine NMEA2000 2m cable + T-Connector
1 × $102.00
Harken Endstops - 22mm High-Beam
1 × $13.95
Cyclops Marine Smarttune 3/4"
1 × $2,373.00Harken Standard Cam Cleat Adapter Plate
1 × $17.95
Harken Genoa Lead Car - 22mm ESP for 4:1 Car Control
1 × $394.95
Cyclops Marine Smarttune 7/8"
1 × $2,557.00
Harken Endstops - 27mm Low-Beam "ESP Style" for Boatbuilders
1 × $16.95
Cyclops Marine Smarttune 5/16"
1 × $1,232.00Harken Standard Cam-Matic 150 Cam Cleat - Double Springs
1 × $37.83Subtotal: $7,249.20