Colligo Marine Top-Down Spinnaker Furler

Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company
Weight 10 lbs
Dimensions 18 × 18 × 18 in
SKU: COLLCN Category:

$1,784.99 – $2,352.95

: $1,982.48 – $2,614.50 (10 %)

Clear

Colligo Industry Standard Spinnaker Furling

Made for furling curved luff asymmetrical spinnaker sails. Top Down style spinnaker furlers use a torsionally stiff “Torque Rope” to transmit torque up from the lower drive end of the furler to the head of the sail allowing the sail to be furled from the top down. The tack of the sail is allowed to spin independently of the torque rope ensuring that the sail will not get twisted on the torque rope.

For sail deployment just pull on one of the sheets and the sail will unfurl and fill with wind. Spinnaker furlers are only as good as the torque rope they use. Colligo Marine has one of the best torque ropes on the market.

Sizing also depends on sail type and weight, predicted usage and boat geometry.

Furler purchases include the drive end and lightweight upper swivel. Spinnaker tack attaches to the leash on the drive end and the head of the sail attaches to the to the upper line terminator in the torque line. Torque line is sold separately and needs to be made to the correct length.  As an alternative to Thimbles and Torsion Cable Clamps, Colligo offers their new Torsion Cable Receivers
NOTE: These furlers do NOT include, Torsion cables, Thimbles and Torsion Cable Clamps, or Torsion Cable Receivers.  

Furler sizing is as follows:

The Rigging Company recommends the following:

  • Add an additional 2-3 feet to the length of your torsion cable to be able to correctly size what you will need.
  • If you will be using a tack line, please Contact Us to make a 2:1 tack line custom to your needs
  • The use of a 2:1 halyard (Click here for a 2:1 Halyard Head Shackle) for optimal tensioning, reduced loading, and optimal system operation

[ok_product]