Showing 1–12 of 74 results
Also known as a Gibb Plug. Use the “T” Terminal backing plate rubber plugs with “T” Terminals. Rubber plug sizes correspond to the terminal wire sizes on the backing plates.
Blue Wave Swageless Stemball Terminal For Standard 1×19 Wire The Blue Wave Swageless Stemball Terminal provides a strong, serviceable wire termination designed for use in stemball mast fittings. Most commonly used as upper shroud terminations at the mast or at the outboard ends of spreaders, stemballs create a clean, low-profile attachment that seats securely into…
Blue Wave Swageless Stud Terminal Mechanical wire stud terminal for turnbuckles and rigging screw assemblies The Blue Wave Swageless Stud Terminal provides a strong, serviceable wire termination with precision-machined threads designed for direct installation into turnbuckles and rigging screws. As one of the most common end fittings in standing rigging systems, stud terminals create a…
Blue Wave Swageless T-Terminal for Standard 1×19 Wire Mechanical wire terminal for masthead and internal mast T-fitting applications The Blue Wave Swageless T-Terminal provides a strong, serviceable wire termination designed for use in internal mast T-sockets. Commonly used as upper shroud terminations at the masthead, T-terminals slide into a matching slot inside the mast and…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A double (interlocking) gate eye is used at the opposite end of the gate hok as a “hinge” for the gate. *NOTE: Hand…
C. Sherman Johnson machine swage lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A double (interlocking) gate eye is used at the opposite end of the gate hook as a “hinge” for the gate….
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire. A stanchion terminal is used where the cable needs to be terminated at the stanchion. 1/4″ size uses 7/32″ swage die.
CS Johnson threaded lifeline studs are for use in various lifeline-related fittings. Note lifeline terminals are not for lifting, hanging or other high load applications. Cross-drilled studs have a hole drilled in the end for a cotter ring. Studs with a 1/4″ – 7/32″ Swage wire size have a smaller final swage diameter in order…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. Generally used at the stern rail when no gate is required with a turnbuckle forward. The “OLD” style uses a toggle nut style…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. Generally used at the stern rail when no gate is required with a turnbuckle forward. 1/4″ wire fitting uses 7/32″ swage die. *NOTE:…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A check nut locks the turnbuckle in place. *NOTE: Hand Crimp terminals, when properly applied, are approximately 65-70% of 7×7 wire strength. While…
C. Sherman Johnson lifeline fittings are the ultimate in strength, durability and aesthetics, giving you complete peace of mind. Standard duty life line fittings match the strength of 7×7 or 1×19 wire*. A check nut locks the turnbuckle in place. *NOTE: Hand Crimp terminals, when properly applied, are approximately 65-70% of 7×7 wire strength. While…
No products in the cart.
|
Uploaded
Failed
|
 |