Showing 1–12 of 44 results
Also known as a Gibb Plug. Use the “T” Terminal backing plate rubber plugs with “T” Terminals. Rubber plug sizes correspond to the terminal wire sizes on the backing plates.
System 3100 Details Extrusions: (8) 7’ (2.13m) round, twin groove accepts #6 (3/16”, 5mm ) luff tape Bearings: 3/8” (9.5mm) Torlon tm (78 in upper and lower triple race bearings) Drum Design: Open cage / Split drum. 4-3/8” (111mm) diameter Line Capacity: 90’ (27.4m) 3/8” (10mm) line. 65’ (19.8m) 7/16” (12mm) line. Shipping Weight: 43 lbs. (20kg)…
System 4100 Details Extrusions: (8) 7’ (2.13m) round, twin groove accepts #6 (3/16”, 5mm ) luff tape Bearings: 3/8” (9.5mm) Torlon tm (78 in upper and lower triple race bearings) Drum Design: Open cage / Split drum. Line Capacity: 90’ (27.4m) 3/8” (10mm) line. 65’ (19.8m) 7/16” (12mm) line. Shipping Weight: 43 lbs. (20kg) packaged furler, 67…
Blue Wave Long Swageless Stud Terminal for Standard 1×19 wire Extended-length mechanical wire stud for turnbuckles and rigging screws requiring additional thread engagement The Blue Wave Long Swageless Stud Terminal provides a strong, serviceable wire termination with extended threaded length for applications where additional thread engagement or adjustment range is required. Designed for use with…
Blue Wave Swageless Stemball Terminal For Standard 1×19 Wire The Blue Wave Swageless Stemball Terminal provides a strong, serviceable wire termination designed for use in stemball mast fittings. Most commonly used as upper shroud terminations at the mast or at the outboard ends of spreaders, stemballs create a clean, low-profile attachment that seats securely into…
Blue Wave Swageless Stud Terminal Mechanical wire stud terminal for turnbuckles and rigging screw assemblies The Blue Wave Swageless Stud Terminal provides a strong, serviceable wire termination with precision-machined threads designed for direct installation into turnbuckles and rigging screws. As one of the most common end fittings in standing rigging systems, stud terminals create a…
Blue Wave Swageless T-Terminal for Standard 1×19 Wire Mechanical wire terminal for masthead and internal mast T-fitting applications The Blue Wave Swageless T-Terminal provides a strong, serviceable wire termination designed for use in internal mast T-sockets. Commonly used as upper shroud terminations at the masthead, T-terminals slide into a matching slot inside the mast and…
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Rigging Stud | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Marine Eye | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Rigging Toggle | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When looking to purchase replacement standing rigging online, the hardest part is getting the final length exactly right — especially when installing…
Replacement Standing Rigging – One-Ended, Cut-to-Length, Ready for Sta-Lok or Hi-Mod Mechanical Fitting T316 Stainless Steel 1×19 wire rope with a Swaged Marine Fork | Cut-to-Length in 5-ft Increments Why One-Ended Standing Rigging? When replacing standing rigging, the hardest part is getting the final length exactly right — especially when installing a new furler or…
No products in the cart.
|
Uploaded
Failed
|
 |