Showing 1–12 of 54 results
Also known as a Gibb Plug. Use the “T” Terminal backing plate rubber plugs with “T” Terminals. Rubber plug sizes correspond to the terminal wire sizes on the backing plates.
System 3100 Details Extrusions: (8) 7’ (2.13m) round, twin groove accepts #6 (3/16”, 5mm ) luff tape Bearings: 3/8” (9.5mm) Torlon tm (78 in upper and lower triple race bearings) Drum Design: Open cage / Split drum. 4-3/8” (111mm) diameter Line Capacity: 90’ (27.4m) 3/8” (10mm) line. 65’ (19.8m) 7/16” (12mm) line. Shipping Weight: 43 lbs. (20kg)…
System 4100 Details Extrusions: (8) 7’ (2.13m) round, twin groove accepts #6 (3/16”, 5mm ) luff tape Bearings: 3/8” (9.5mm) Torlon tm (78 in upper and lower triple race bearings) Drum Design: Open cage / Split drum. Line Capacity: 90’ (27.4m) 3/8” (10mm) line. 65’ (19.8m) 7/16” (12mm) line. Shipping Weight: 43 lbs. (20kg) packaged furler, 67…
Blue Wave Swageless Eye Toggle Terminal Mechanical wire terminal with integrated articulation for standing rigging The Blue Wave Swageless Eye Toggle Terminal combines a mechanical swageless wire termination with a built-in toggle connection, allowing proper articulation where rigging must align under load. This makes it an excellent choice for chainplate connections and other attachment points…
Blue Wave Swageless Fork Terminal Mechanical wire terminal for secure clevis pin connections in standing rigging The Blue Wave Swageless Fork Terminal provides a strong, serviceable wire termination with a fork end designed to connect directly to chainplates, toggles, turnbuckles, and other rigging hardware using a clevis pin. This makes it one of the most…
Blue Wave Long Swageless Stud Terminal for Standard 1×19 wire Extended-length mechanical wire stud for turnbuckles and rigging screws requiring additional thread engagement The Blue Wave Long Swageless Stud Terminal provides a strong, serviceable wire termination with extended threaded length for applications where additional thread engagement or adjustment range is required. Designed for use with…
Blue Wave Swageless Marine Eye Terminal for Standard 1×19 Wire Mechanical wire terminal for secure eye-to-pin connections in standing rigging The Blue Wave Swageless Marine Eye Terminal provides a strong, serviceable wire termination with a precision-machined eye end designed to connect directly to toggles, chainplates, padeyes, and other rigging hardware using a clevis pin or…
Blue Wave Swageless Stemball Terminal For Standard 1×19 Wire The Blue Wave Swageless Stemball Terminal provides a strong, serviceable wire termination designed for use in stemball mast fittings. Most commonly used as upper shroud terminations at the mast or at the outboard ends of spreaders, stemballs create a clean, low-profile attachment that seats securely into…
Blue Wave Swageless Stud Terminal Mechanical wire stud terminal for turnbuckles and rigging screw assemblies The Blue Wave Swageless Stud Terminal provides a strong, serviceable wire termination with precision-machined threads designed for direct installation into turnbuckles and rigging screws. As one of the most common end fittings in standing rigging systems, stud terminals create a…
Blue Wave Swageless T-Terminal for Standard 1×19 Wire Mechanical wire terminal for masthead and internal mast T-fitting applications The Blue Wave Swageless T-Terminal provides a strong, serviceable wire termination designed for use in internal mast T-sockets. Commonly used as upper shroud terminations at the masthead, T-terminals slide into a matching slot inside the mast and…
Hi-MOD Compression Fittings Produced by Petersen Stainless Rigging in the UK and distributed exclusively by Hayn Marine in the USA, the Hi-MOD mechanical terminal is the latest advancement in swageless fittings. These terminals have a unique crown ring that assures the wires stay evenly spaced around the fitting, eliminating the need to bend the wires,…
Hand-fitted instead of machine swaged, Sta-Lok mechanical fittings are great for uses where the exact wire length isn’t known prior to fitment or a swage machine isn’t available. The Sta-Lok terminal can be fitted on site using very simple hand tools. The Sta-Lok terminal will work under both constant and variable shock loading, making it…
No products in the cart.