Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Showing 1–16 of 20 results

  • Selden Adjustable Tack Swivel (ATS)

    $282.60 – $507.60
    : $314.00 – $564.00 (10 %)

    This accessory for Seldén GX furlers enables the sailor to easily trim the luff of the gennaker. The Adjustable Tack Swivel slides up and down over the AT-cable and is handled from the cockpit with a down haul. As opposed to trimming the luff by slacking the halyard, the AT-cable can now be permanently tensioned…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Code 0 To Asymetric Spinnaker / Gennaker

    $243.00 – $507.60
    : $270.00 – $564.00 (10 %)

    An adapter adds a tack swivel to a CX furler. The CX drum can now be used both for Code 0 and for asymmetric spinnaker/gennaker. The adapters feature the patented Seldén line lock and Torlon ball bearings.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden continuous furling line

    Selden Continuous Furling Line

    $37.80 – $440.10
    : $42.00 – $489.00 (10 %)

    Selden continuous furling lines are a cover-dependent double braid polyester line. They come factory-spliced into a continuous loop, and have the option of being spliced into a Selden Twin Cam block. Length listed is the length of the loop on deck – e.g. a 4m rope length is an 8m length of rope spliced into…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Low friction shackle

    $56.70 – $215.10
    : $63.00 – $239.00 (10 %)

    This snap shackel has a big, well rounded loop allowing the rope to slide with low friction and it can be used to tension a Seldén CX with 2:1 purchase. This not only makes for better performance but it also makes it easier to connect the Seldén CX to a bowsprit, from the foredeck. The…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden twin cam block

    Selden Twin Cam Block for Continuous Furling Lines

    $143.10 – $197.10
    : $159.00 – $219.00 (10 %)
    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden double stanchion fairlead

    Selden Double Stanchion Fairlead

    $105.30
    : $117.00 (10 %)

    The Selden double stanchion fairlead for continuous furling lines slide over 25-30mm (1 to 1-1/4″) stanchions and feature a spring-loaded metal bracket that can be opened to capture a continuous furling line without having to undo the splice in the line.

    Add to cartDone
  • Selden Dead-end Fitting

    Selden Dead-end Fitting

    $170.10 – $421.20
    : $189.00 – $468.00 (10 %)

    The Selden dead-end fitting is installed in the mast to serve as a termination strongpoint for 2:1 halyards. The fitting requires a cutout in the mast and is held in place with four fasteners that thread into the integrated backing plate.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden 2:1 Halyard Block

    2:1 Halyard Head Shackle

    $154.80 – $349.20
    : $172.00 – $388.00 (10 %)

    In order to achieve the desired performance of a top-down furling system when using a Code 0 or asymmetric spinnaker, the halyard load must be higher than what normal halyard boxes and stoppers can handle. Therefore, a 2:1 purchase is recommended to be used. The halyard is dead-ended at the mast (preferably with a swivel…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Selden Anti-Twist shackle

    $45.90 – $94.50
    : $51.00 – $105.00 (10 %)

    The Anti-Twist shackle is an optional shackle connecting the halyard to the halyard swivel. The long pin will lean against the mast and prevent a “soft” halyard from twisting. This shackle is not necessary for a 2:1 halyard set up nor is it for a high quality Dyneema® halyard.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Bowsprit Brackets Proudly Sold By The Rigging Company

    Bow Brackets for Selden Bowsprit Kits

    $143.10 – $197.10
    : $159.00 – $219.00 (10 %)

    Use these bow brackets along with a Selden Bowsprit kit to mount a Selden bowsprit on your vessel. All brackets are stainless steel with a PA inner lining. Several configurations of bracket are available based on the geometry of your foredeck & bow area. Frequently a riser fabricated from G10 or Star-board is required for…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 104 Foresail Furler For Boats 20′ to 27′

    $1,483.20 – $2,264.40
    : $1,648.00 – $2,516.00 (10 %)

    Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Torsion Cable

    Selden Torsion Cables

    $265.50 – $1,645.20
    : $295.00 – $1,828.00 (10 %)

    Selden torsion cables are designed to be as rigid as possible to allow for quick, safe furling. When ordering a cable, be sure to order an appropriate length for your chosen furling system as many systems publish a maximum cable length.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 204 Foresail Furler For Boats 28′ to 35′

    $2,682.90 – $3,765.60
    : $2,981.00 – $4,184.00 (10 %)

    Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 304 Foresail Furler For Boats 38′ to 45′

    $4,043.70 – $5,385.60
    : $4,493.00 – $5,984.00 (10 %)

    Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Furlex Furling products proudly sold by the Rigging Company

    Selden Furlex 404 Foresail Furler For Boats 47′ to 55′

    $5,645.70 – $7,364.70
    : $6,273.00 – $8,183.00 (10 %)

    Selden FURLEX S The S-series is Seldén’s traditional jib furling and reefing system. Operated by pulling a furling line and fitted above deck, the S-series has been seen on boats worldwide for decades. The basic concept behind Furlex remains — a complete and reliable jib furler supported by professional sailmakers and riggers. 104S 204S 304S…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page
  • Selden Sprit Kit

    Selden Gennaker Bowsprit Kit

    $774.00 – $5,512.50
    : $860.00 – $6,125.00 (10 %)

    The Selden gennaker bowsprit kit is an excellent option to retrofit just about any cruising vessel for easier & more efficient use of gennakers and other off-the-wind asymmetric sails. Selden bowsprit kits give gennakers more clear air by moving the tack forward, facilitate simpler & faster maneuvers, are always ready for quick extension, and improve…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page