Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

  • Show more

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

  • Show more

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

Product Track Size -

Showing all 12 results

  • Colligo Terminator Thimbles for Colligo Furler products. Proudly sold by The Rigging Company

    Colligo Furler Terminator Fittings

    $107.00$224.00
    : $119.00$249.00 (10 %)

    These Terminator fittings are made specifically to work with Colligo furling gear (see below). They allow use with Colligo Torque Rope clamps and pin directly to the furling gear itself. CSS75BLK Furler Line terminator, up to 11 mm torque line, Up to 1/2″ pin CSS75A Furler Line terminator, up to 15 mm torque line, Up…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Marine Code 0 and Luff Line Furlers Proudly sold by the Rigging Company

    Colligo Marine Code 0 and Luff Line Furlers

    $1,169.95$1,786.95
    : $1,299.00$1,984.50 (10 %)

    Colligo Marine® Furlers are unique in that they are all designed with maintenance free bearing systems, but they can all be taken apart and serviced if needed. From heavy duty automotive style bearings with double seals in Colligo Marine CN5 series to Torlon or Ceramic bearing systems in the head swivels or CF1.5 series furlers….

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Marine Top-Down Spinnaker Furler Proudly sold by the Rigging Company

    Colligo Marine Top-Down Spinnaker Furler

    $1,784.99$2,352.95
    : $1,982.48$2,614.50 (10 %)

    Colligo Industry Standard Spinnaker Furling Made for furling curved luff asymmetrical spinnaker sails. Top Down style spinnaker furlers use a torsionally stiff “Torque Rope” to transmit torque up from the lower drive end of the furler to the head of the sail allowing the sail to be furled from the top down. The tack of…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo torque Rope Receivers proudly sold by The Rigging Company

    Colligo Torque Rope Receivers

    $129.99$199.99

    For use with torque rope line for Code 0 and Spinnaker furling gear. One end fitting now replaces the thimble and clamp that was need for a proper termination before. Colligo Torque rope receivers are easy to install and can be removed and reinstalled to get the line length correct.  Not that any of us have…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Torque Rope (Anti-tortion cable) proudly sold by The Rigging Company

    Colligo Torque Rope (Anti-Torsion line)

    $4.40$18.00 foot
    : $4.86$19.90 (9 – 10 %)

    Colligo Torque ropes are for  luff lines for code zero style sails and torque lines for top down furled spinnakers.

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Selden torsion cable clamp

    Colligo Tosion Cable Clamps

    $80.10$125.10
    : $89.00$139.00 (10 %)

    Colligo Torque Rope Clamps are designed for use with Code 0, gennaker, and spinnaker furlers that utilize a torsion cable. The clamps are easy to install and can be adjusted as needed. Works with all major furler models, sold per clamp. Note that for some furler systems, two clamps are recommended at one or both…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Standard Chainplate Distributor

    Colligo Chainplate Lashing Distributors

    $44.10$224.10
    : $49.00$249.00 (10 %)

    Colligo Chainplate Distributors are designed for setting up the tension of your rigging through lashings at chainplates on deck, mast fittings, or even turnbuckles. Colligo recommends using lashings only on boats smaller than 30′, and on specific multihull applications; otherwise a turnbuckle system or turnbuckle & lashing combo system of tensioning should be used. Distributors…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Cheeky Tangs

    Colligo Cheeky Tangs

    $125.10$296.10
    : $139.00$329.00 (10 %)

    Colligo’s patented Cheeky Tang fittings are a simple & robust way to splice Colligo Dux rigging directly to the mast. They can be used with either standard thru-bolt style mast tangs, or adapted for use with T-style fittings (sold separately). Double Cheeky Tangs allow for two lines to be spliced to the same fitting, useful…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Dux

    Colligo Dux Dyneema

    $2.31$22.01
    : $2.57$24.45 (10 %)

    Designed by Colligo and manufactured by Hampidjan, Colligo Dux is an uncovered, heat-stretched SK75 Dyneema braid. Designed for use in standing rigging applications, it has the lowest constructional elongation of any product on the market. Newer chemistries such as SK90 and SK99 are heat-stretched at the fiber level so they do not set as well…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Open Terminator Fitting

    Colligo Open Terminator Fittings

    $71.10$80.10
    : $79.00$89.00 (10 %)

    Colligo Terminator end fittings meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Colligo “Open” Terminator fittings do not have clevis pin holes or multiple small lashing holes – they are a…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo Standard Terminator

    Colligo Standard Terminator Fittings for Synthetic Rigging

    $71.10$224.10
    : $79.00$249.00 (10 %)

    Colligo Terminator end fittings are the only spliceable, lashable, and pinnable end fittings available that meet Hampidjan’s recommended minimum 5/1 bending ratio for Dyneema. This is essential for long term durability of Dyneema-based lines, as tight bending radii can cause compressive stresses that weaken the line considerably. Clevis pin holes come with a bushing installed,…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page
  • Colligo T-Bolt Fitting for Cheeky Tangs

    Colligo T-Bolt Fittings for Cheeky Tangs

    $98.10
    : $109.00 (10 %)

    Colligo T-Bolt Adapters attach to Cheeky Tang fittings as a substitute for the thru-bolt, so the Cheeky Tang can be attached to the mast via a T-fitting backing plate. These adapters allow for an easy conversion to synthetic rigging for things like running backstays and inner forestays. These fittings consist of a T-head on a…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page