Showing 1–12 of 32 results
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 25mm control blocks, 2x Small Boat Deadends, and 8x M5 fasteners.
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 35mm control blocks, 2x Big Boat/Midrange Deadends, and 8x M6 fasteners.
This kit allows for the purchase of a hi-load ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 40mm control blocks, 2x Big Boat Deadends, and 8x M8 fasteners.
The Harken Crossbowâ„¢ is a self-tacking jib system designed for high-performance dinghies, skiffs, and catamarans under six meters (20 feet). The system features a curved track that hinges to align both car and track with the sheet loads for less friction, more load-bearing capacity, and for an ultra-lightweight design. The two-piece car body is machined…
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 4-3/16″ Width: 2-1/4″ Height above track: 2-5/16″ Max line dia: 12mm – 1/2″ Max Working Load: 610lbs Breaking Load: 1200lbs
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 2-1/16″ Width: 2-1/4″ Height above track: 2-9/16″ Max line dia: 10mm – 3/8″ Max Working Load: 900lbs Breaking Load: 1800lbs
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm high-beam track.
Harken 51mm Trigger Cleat Eyestrap
1 × $11.95
Harken 2.25" Hexa-Cat Base Block - Swivel, Cam Cleat
1 × $260.95
Schaefer Clear Step Lead Block For 1-1/4" Stanchions
1 × $202.19
Schaefer 5 Series Organizer Triple - Stainless
1 × $201.33
Harken Two-Speed Mainsheet System 3:1, 6:1
1 × $851.95
Schaefer Clear Step Lead Block for 1" Stanchions
1 × $83.30
Harken Two-Speed Mainsheet Self-Contained System 4:1/8:1
1 × $880.95
Harken 22 mm Fiddle Block - V-Jam, Becket
1 × $46.95
Schaefer 5 Series Organizer Triple - Aluminum
1 × $193.82
Schaefer 5 Series Organizer 2 Over 2 - Aluminum
1 × $250.07
Harken 3.00" Hexa-Cat Base Block - Swivel, Cam Cleat
1 × $322.95Subtotal: $3,306.39