Showing 97–112 of 195 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Control tang pin: 3/16″…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 6-3/4″ Width: 3-1/8″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken Micro CB traveler cars are used on small dinghies and catamarans. Ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Max working load: 850lbs
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 2-7/8″ Width: 2-1/4″ Height: 1-11/16″ Car body height: 15/16″ Max working load: 850lbs Breaking load: 2500lbs Minimum curved track radius: 3.5′
Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Race once with the windward sheeting traveler car and you’ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-7/8″ Width: 3-1/16″ Height: 1-11/16″ Max line dia: 8mm…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Linked double cars allow for higher working loads than individual cars. Length: 8-3/4″ Width: 2-3/4″ Height: 3-1/8″…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 5-3/16″ Width: 2-3/4″ Car body height: 2″ Max working load: 2300lbs Breaking load:…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
No products in the cart.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
