Showing 1–12 of 116 results
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 25mm control blocks, 2x Small Boat Deadends, and 8x M5 fasteners.
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 35mm control blocks, 2x Big Boat/Midrange Deadends, and 8x M6 fasteners.
This kit allows for the purchase of a hi-load ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 40mm control blocks, 2x Big Boat Deadends, and 8x M8 fasteners.
The Harken Crossbowâ„¢ is a self-tacking jib system designed for high-performance dinghies, skiffs, and catamarans under six meters (20 feet). The system features a curved track that hinges to align both car and track with the sheet loads for less friction, more load-bearing capacity, and for an ultra-lightweight design. The two-piece car body is machined…
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon? rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 7-1/2″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 7500lbs…
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon? rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 5″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 5000lbs…
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 4-3/16″ Width: 2-1/4″ Height above track: 2-5/16″ Max line dia: 12mm – 1/2″ Max Working Load: 610lbs Breaking Load: 1200lbs
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 2-1/16″ Width: 2-1/4″ Height above track: 2-9/16″ Max line dia: 10mm – 3/8″ Max Working Load: 900lbs Breaking Load: 1800lbs
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
Harken High-Beam Endstops - 13mm w/Dead-End
1 × $12.95
Harken 40 mm 90-Degree Carbo Block
1 × $41.95
Harken 57 mm Carbo Block - Swivel, Becket, Cam Cleat
1 × $161.95Subtotal: $216.85