Showing 1–16 of 116 results
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 25mm control blocks, 2x Small Boat Deadends, and 8x M5 fasteners.
This kit allows for the purchase of an ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 35mm control blocks, 2x Big Boat/Midrange Deadends, and 8x M6 fasteners.
This kit allows for the purchase of a hi-load ESP car or ESP end control fitting to be upgraded from 1:1 to 4:1. Includes 4x 40mm control blocks, 2x Big Boat Deadends, and 8x M8 fasteners.
The Harken Crossbowâ„¢ is a self-tacking jib system designed for high-performance dinghies, skiffs, and catamarans under six meters (20 feet). The system features a curved track that hinges to align both car and track with the sheet loads for less friction, more load-bearing capacity, and for an ultra-lightweight design. The two-piece car body is machined…
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon® rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 7-1/2″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 7500lbs…
The CRX Roller Traveler carries almost double the load at half the weight of similarly sized traveler cars. Torlon® rollers provide increased bearing contact over balls to handle higher loads. Captive bearings make cars easy to load and maintain. Use with Harken 32mm CRX track. Length: 5″ Width: 3-3/8″ Height: 2-1/2″ Max working load: 5000lbs…
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 4-3/16″ Width: 2-1/4″ Height above track: 2-5/16″ Max line dia: 12mm – 1/2″ Max Working Load: 610lbs Breaking Load: 1200lbs
Harken end controls allow for the installation of traveler purchases. Sold as a set of two, includes fasteners. Sheave dia: 51mm Length: 2-1/16″ Width: 2-1/4″ Height above track: 2-9/16″ Max line dia: 10mm – 3/8″ Max Working Load: 900lbs Breaking Load: 1800lbs
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….
Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″
These 22 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
These 27 mm endstops finish off traveler and genoa lead track ends cleanly. The molded endstops are light and smooth so lines roll off of them without the worry of snags. Sold in pairs. Fasteners not included. Use with Harken track 27mm low-beam track.
Endstops absorb shock loads. Use the built-in groove to deadend a 2:1 control line. Sold in pairs. Fasteners not included. Max working load: 250lb Breaking Load: 750lb Height above track: 3mm – 1/8″ Use with Harken track 13mm low-beam track.
Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 22mm low-beam track.
No products in the cart.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
