Product Vendor -

Product Unit Type -

Product Sheave Size -

Product Block Type -

Product Line Type -

Product Rope Size -

Product Color -

Product Hydraulic Adjuster Type -

Product Wire Rigging Type -

Product Standing Rigging Part -

Product Lifeline Fitting Style -

Product Lifeline Fitting Type -

Product Wire Size -

Product Pin Diameter -

Product Furler Type Sub Category -

Product Adjuster Length -

Product Poles-Sprits Materials -

Product Traveler Part -

Product Traveler Type -

  • Show more

Showing 17–32 of 88 results

  • Harken 32mm End Control with Double Sheave

    Harken End Control – 32mm w/Double Sheave

    $501.93
    : $557.70 (10 %)

    High-performance end controls allow the installation of 2:1 to 4:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Assemblies secure to track, eliminating additional holes. Tough one-piece bases are machined from a single piece of aluminum. Sold as a set of two….

  • Harken 32mm End Control with Triple Sheaves

    Harken End Control – 32mm w/Triple Sheaves

    $635.09
    : $705.65 (10 %)

    High-performance end controls allow the installation of 2:1 to 6:1 purchases. Designed for high-performance, free-running systems, Carbo control blocks with Delrin® ball bearings let cars instantly adjust and release under load. Assemblies securely to track, eliminating additional holes. Tough one-piece bases are machined from a single piece of aluminum. Sold as a set of two….

  • Harken 22mm Low Beam Endstops

    Harken Endstops – 32mm Low-Beam “ESP Style” for Boatbuilders

    $20.52
    : $22.80 (10 %)

    These light-duty endstops are designed to keep cars from coming off the end of the track; a stopper knot in the purchase system to prevent the car slamming into the endstop is recommended as these are not engineered to handle repeated shock loads from a car slamming into them. Sold in pairs. Fasteners not included….

  • Harken 32mm ESP Genoa Car Lead for 3:1 Controls

    Harken Genoa Lead Car – 32mm ESP for 3:1 Car Control

    $1,058.49
    : $1,176.10 (10 %)

    CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature ESP sleeve bearing sheaves. Cars feature car-mounted, sleeve-bearing control blocks for strength and durability. All…

  • Harken 32mm ESP Genoa Car for 4:1 Controls

    Harken Genoa Lead Car – 32mm ESP for 4:1 Car Control

    $1,092.33
    : $1,213.70 (10 %)

    CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature ESP sleeve bearing sheaves. Cars feature car-mounted, sleeve-bearing control blocks for strength and durability. All…

  • Harken 32mm Pinstop Genoa Lead

    Harken Genoa Lead Car – 32mm ESP for Pinstop Tracks

    $1,107.77
    : $1,230.85 (10 %)

    Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track. The Harken ESP range is a good budget option for cruisers and club racers where budget is as much of a concern as…

  • Harken 32mm Hi-Load Genoa Car with 2:1 Control

    Harken Genoa Lead Car – 32mm ESP Hi-Load for 2:1 Car Control

    $2,240.96
    : $2,489.95 (10 %)

    CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. The Harken ESP range is a good budget option for cruisers and club racers where budget is as much of a concern as performance is. Use…

  • Harken 32mm Pinstop Genoa Lead

    Harken Genoa Lead Car – 32mm ESP Hi-Load for Pinstop Tracks

    $1,915.92
    : $2,128.80 (10 %)

    Use pinstop cars in applications where lead positions change infrequently. Pinstop and ball bearing genoa lead cars both run on ball bearing track, allowing you to upgrade your system without changing track. The Harken ESP range is a good budget option for cruisers and club racers where budget is as much of a concern as…

  • Harken 32mm Genoa Car Lead for 3:1 Controls

    Harken Genoa Lead Car – 32mm for 3:1 Car Control

    $1,626.30
    : $1,807.00 (10 %)

    CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…

  • Harken 32mm Genoa Lead Car for 4:1 Controls

    Harken Genoa Lead Car – 32mm for 4:1 Car Control

    $1,678.64
    : $1,865.15 (10 %)

    CB adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. Wide sheave holds two sheets during sail changes. Sheave carriers feature high-performance sheaves with roller bearings to handle radial loads, while sideload balls handle thrust loads…

  • Harken 32mm Genoa car - Non-Captive-Bearing for 4:1 Controls

    Harken Genoa Lead Car – 32mm Non-Captive-Bearing for 4:1 Car Control

    $1,729.04
    : $1,921.15 (10 %)

    Adjustable genoa lead cars feature recirculating Torlon® ball bearings for easy adjustment under full sheet loads. Stainless steel sheave carriers pivot 60 degrees to accommodate changing lead angles. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2004. Car has two…

  • Harken 32mm Halyard Tensioner Car

    Harken Halyard Tensioner Slider Car – 32mm Single Pin

    $1,658.34
    : $1,842.60 (10 %)

    Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…

  • Harken 40mm Halyard Tensioner Track

    Harken Halyard Tensioner T-Track – 32mm

    $331.70
    : $368.55 (10 %)

    Designed for rope or wire halyards on large cruisers, the Harken halyard tensioner locks halyards at full hoist and frees your halyard winch for other functions. The one-piece aluminum car body is Hard Lube-anodized for durability. Track is extruded from 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. Choose the 40 mm version in…

  • Harken Hi-Beam Risers for 27-32mm Tracks

    Harken Hi-Beam Track Riser Set

    $1,058.13
    : $1,175.70 (10 %)

    Use these risers for mid-boom travelers that must clear companionway hatches. Risers fit most cabintops and articulate for use with either straight or curved tracks. Use with 27mm or 32mm Hi-Beam tracks. A: 6-7/8″ B: 9-9/16″ C: 6-11/16″ D: 4-5/16″ E: 1-3/4″ F: 3″

  • Harken Heavy-Duty High-Beam Endstop

    Harken High-Beam Endstops – 32mm Heavy-Duty

    $72.00
    : $80.00 (10 %)

    Endstops absorb shock loads. Sold in pairs. Fasteners not included. Use with Harken track 32mm high-beam track.

  • Harken 22mm Hi-Beam Slide Bolt Track

    Harken High-Beam Track – 32mm Slide-Bolt

    $251.06$746.87
    : $278.95$829.85 (10 %)

    Track is extruded from high-grade 6061-T6 aluminum and hardcoat-anodized for a hard, long-lasting surface. High-beam variable hole spacing track is used to span cockpits or other unsupported areas. Track features internal slide bolts, allowing new track to be installed without drilling additional holes. Mounts with 5/16″ hex-head bolts. Harken Low-Beam tracks are designed to be…

    Select optionsLoading Done This product has multiple variants. The options may be chosen on the product page