Showing 61–71 of 71 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-1/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-3/8″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-3/4″ Width: 4-1/8″ Max line dia: 10mm – 3/8″…
Race once with the windward sheeting traveler car and you?ll never race without one again. Pull the car above the centerline without releasing the leeward control line. Tack, and the car stays in the same position, ready to be pulled to the new windward side. Length: 6-3/4″ Width: 4-1/8″ Max line dia: 10mm – 3/8″…
Stand-up toggles hold blocks upright on travelers. This toggle will fit blocks and cars with either 1/4″ or 5/16″ (6mm or 8mm) pins. Height: 2-5/16″ Max working load: 2500lb Accepted blocks: Element 45 & 60mm and Carbo 75mm singles/doubles/triples, Small Boat 3″ single/fiddle/midrange blocks, 57mm Black Magic single.
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 27mm car w/shackle, blocks & dead-ends for a 3:1 purchase, and two a set of 27mm ESP end controls w/double…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Kit includes a 27mm car w/shackle & blocks, and a set of 22mm end controls w/blocks & cam cleats. Track & fasteners required,…
When end control assemblies are used, trim caps finish track ends. Use with Harken track 27mm high-beam track.
When end control assemblies are used, trim caps finish track ends. Use with Harken track 27mm low-beam track.
No products in the cart.