Showing 49–60 of 71 results
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 3-1/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 5-3/16″ Width: 3-3/8″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius: 9′ Toggle pin dia: 5/16″
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 5-3/16″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 2300lbs Breaking load: 5000lbs Minimum curved track radius:…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. This is the non-captive-bearing version of the car, which comes on a car loader to run on a non-CB style track supplied before 2002. Length: 4-1/4″ Width: 2-3/4″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum…
Harken ball bearing traveler cars allow easy adjustment of loaded sails. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. These Athwartship Loop Cars are strong, soft-attach cars with athwartship attachment holes keeping the up/down control lines as low to the car as possible. These cars can also be…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 4-1/4″ Width: 2-3/4″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius: 8′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 4-1/4″ Width: 3″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius: 8′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Car has blocks & deadends for a 3:1 control line. Length: 4-1/4″ Width: 3-7/32″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs…
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Length: 4-1/4″ Width: 3-3/8″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius: 8′
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 3-9-16″ Height: 2″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
Designed for cockpit-mounted cruising installations and similar setups, traveler cars with Carbo-Cams allow traveler control cleating at the car instead of the track ends. On-car cleating paired with single-sheave end controls leave room for you to open the lazarette. They also increase purchase from 2:1 to 3:1 compared to systems trimmed from single-sheave end controls….
Harken ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit. Track comes in low- and high-beam configurations and is predrilled with holes for mounting fasteners. Use with any Harken 27mm track. Length: 4-1/4″ Width: 2-3/4″ Height: 3-1/8″ Max working load: 1800lbs Breaking load: 5000lbs Minimum curved track radius:…
No products in the cart.